QUIN D520BT Label Printer
ជាងview លក្ខណៈ ពិសេស គន្លឹះ
This printer is a Bluetooth thermal label printer ideal for shipping labels, barcodes, warehouse tags, and e‑commerce use. It doesn’t require ink (uses thermal printing technology).
លក្ខណៈបច្ចេកទេសស្នូល
- បច្ចេកវិទ្យាបោះពុម្ព៖ Thermal (inkless) printing — no ink or toner needed.
- ល្បឿនបោះពុម្ពអតិបរមា៖ Up to ~150 mm/sec.
- ដំណោះស្រាយ៖ ~203 dpi (sharp, high‑contrast output).
- Supported Label Width: ~20 – 115 mm (fits common 4″ shipping labels).
ការតភ្ជាប់៖
- ប៊្លូធូស (wireless printing from phones/tablets)
- យូអេសប៊ី (wired connection to computers)
- ទូរស័ព្ទចល័ត & Desktop Support: Works with iOS/Android devices and Windows/Mac through the Labelife app/software.
- ចល័ត និងបង្រួម៖ Lightweight design (~1100 g) with a built‑in label bin for ~500 labels.
- ករណីប្រើប្រាស់៖ Shipping labels, barcodes, warehouse tags, Amazon FBA labels, badges, and general office/retail labels.
ការដំឡើងនិងការដំឡើង
- Download App/Software
- ស្វែងរក the Labelife app on the App Store or Google Play for Bluetooth printing.
- For PC/Mac, install the Labelife editor/driver from official support pages.
- ភ្ជាប់ម៉ាស៊ីនបោះពុម្ព
- Turn on the printer and open Labelife.
- Pair it inside the app (not in the phone’s Bluetooth menu).
- When the app shows a green check, the printer is connected.
- ផ្ទុកស្លាក
- Open the top cover and correctly place the label roll (thermal side facing up).
- Ensure the labels are aligned for smooth feeding.
- បោះពុម្ព
- Choose or design your label in the app/editor and send it to print.
ការដោះស្រាយបញ្ហាទូទៅ
- Paper Jam or App Alerts
- Make sure the label is correctly loaded and straight.
- Check that the paper size set in the app matches the actual label used.
- Clean the print head and paper sensor with 75% alcohol pads if dusty.
- Fully close the top cover until it clicks.
- ពន្លឺភ្លើងក្រហម
- Indicates a paper jam or dirt affecting the print head — clean and reset.
- បញ្ហាការតភ្ជាប់ប៊្លូធូស
- Pair from inside Labelife, not via phone Bluetooth settings.
- Update the Labelife app to the latest version.
- Incorrect Print Size / Skipped Labels
- Recalibrate label sensing inside the app if using gap/mark separated labels.
- Restart the printer and reinsert the label.
គន្លឹះថែទាំ និងថែទាំ
To keep your D520BT working reliably over time:
- ការសម្អាតជាប្រចាំ
- Print Head: Wipe gently with isopropyl alcohol (90%+) to remove residue.
- Sensors & Rollers: Use compressed air to blow out dust.
- Exterior: Clean with a soft cloth; avoid harsh chemicals.
- ការត្រួតពិនិត្យជាប្រចាំ
- Inspect label guides and rollers for wear or label debris.
- Replace worn or damaged label rolls and parts when needed.
- ការអាប់ដេតកម្មវិធី
- Keep the Labelife app and printer firmware (if available) updated for best compatibility and performance.
- ការថែទាំបង្ការ
- Schedule weekly quick cleanings if used heavily (warehouses/shops).
- Avoid printing dusty or dirty labels, which can degrade print head life.
ឯកសារ/ធនធាន
 | ម៉ាស៊ីនបោះពុម្ពស្លាក D520BT |
ឯកសារយោង
- សៀវភៅណែនាំអ្នកប្រើប្រាស់manual.tools
Published: April 25, 2026
បានធ្វើបច្ចុប្បន្នភាព៖ ថ្ងៃទី 29 ខែមេសា ឆ្នាំ 2026