បន្ទះការពារតុ VEVOR ទំហំ 36x60 អ៊ីញ 1.5mm ស្រោបដោយ PVC (ម៉ូដែល F085-1.5M-092155) សៀវភៅណែនាំ

1. សេចក្តីផ្តើម

This manual provides essential information for the proper setup, operation, and maintenance of your VEVOR 36x60 Inch 1.5mm Frosted PVC Table Protector. This product is designed to offer comprehensive protection for various tabletops, preventing damage from scratches, stains, watermarks, and heat.

The frosted design revitalizes the appearance of your table while maintaining its protective qualities. Crafted from high-quality PVC, it is built for durability and ease of use.

Figure 1: VEVOR 36x60 Inch Frosted PVC Table Protector, shown rolled up and ready for installation.

2. ការដំឡើងនិងការដំឡើង

The table protector is shipped rolled to minimize creasing. Follow these steps to ensure a smooth and flat application:

1. វេចខ្ចប់ និងសម្អាត៖ Carefully unroll the table protector. Wipe away any dust or debris from both sides of the protector and your tabletop using a damp cloth. Ensure the tabletop is clean and dry before proceeding.
2. Flattening the Protector: Due to packaging, the protector may initially have a slight curl. Several methods can help it lay flat:
   • Hair Dryer Method: Use a hair dryer on medium heat, holding it approximately 10 cm (4 inches) away from the mat's surface. Gently warm the material to help it relax and flatten.
   • Weight Application: Place heavy, flat objects (such as books) evenly across the surface of the protector overnight to encourage it to flatten.
   • ការប៉ះពាល់នឹងពន្លឺព្រះអាទិត្យ៖ Expose the unrolled PVC cover to direct sunlight for several hours. The warmth will help the material become more pliable and flatten.
   • Warm Water Immersion: For stubborn curls, steep the protector in warm water for a few minutes, then lay it flat and smooth it out.
3. Application to Tabletop: For optimal adhesion and to prevent air bubbles, especially on smooth surfaces like glass, marble, or varnished wood, lightly mist the tabletop with water before placing the protector. Carefully lay the protector flat, starting from one end and smoothing it out with a plastic sheet or soft cloth to remove any trapped air bubbles.

Figure 2: Visual guide for flattening the table protector using various methods.

3. សេចក្តីណែនាំប្រតិបត្តិការ

The VEVOR Table Protector is designed for versatile use across various environments and applications:

• ការការពារផ្ទៃ៖ This protector safeguards your tabletop from scratches, spills, watermarks, and heat damage. Its 1.5 mm thickness provides a robust barrier against daily wear and tear.
• សុវត្ថិភាពទំនាក់ទំនងអាហារ៖ The PVC material is food-grade, allowing for direct contact with food items without concerns about safety.
• ភាពធន់នឹងកំដៅ៖ The protector is heat resistant up to 176°F (80°C). For items hotter than this, such as freshly removed pots or pans, it is recommended to use a placemat or trivet on top of the protector to prevent potential damage.
• កម្មវិធីចម្រុះ៖ Suitable for a wide range of surfaces including dining tables, kitchen countertops, end tables, computer desks, dressers, and TV cabinets. It is particularly effective on wooden textured desktops.
• ការប្ដូរតាមបំណង៖ The material can be cut to size using sharp scissors or a utility knife if a custom fit is desired.

Figure 3: Demonstrating direct food contact on the table protector.

រូបភាពទី ១៣៖ ឧamples of the table protector used on dining tables, end tables, office desks, and bedside tables.

4. ការថែទាំ និងសម្អាត

Maintaining your VEVOR Table Protector is simple due to its waterproof and stain-resistant properties:

• ការសម្អាតប្រចាំថ្ងៃ៖ For everyday spills and dust, simply wipe the surface with a damp ក្រណាត់។
• ស្នាមប្រឡាក់រឹងរូស៖ For more persistent stains, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners, as these may damage the PVC material or affect its clarity.
• ការសម្ងួត៖ After cleaning, dry the surface with a soft, dry cloth to prevent water spots and maintain its clear appearance.

Figure 5: Easy cleaning of spills from the table protector surface.

5. ការដោះស្រាយបញ្ហា

If you encounter issues with your table protector, consider the following common solutions:

• Problem: Protector is not lying flat.
  ដំណោះស្រាយ៖ Refer to the "Flattening the Protector" steps in Section 2. Setup and Installation. Applying gentle heat or weights over time will help the material relax and conform to the tabletop.
• Problem: Air bubbles are visible under the protector.
  ដំណោះស្រាយ៖ If applying to a very smooth surface (glass, marble, high-gloss wood), ensure the tabletop was lightly misted with water before application. Gently lift a section of the protector and re-smooth it down using a plastic sheet or soft cloth, pushing air bubbles towards the edges.
• Problem: Protector appears cloudy or has marks.
  ដំណោះស្រាយ៖ Ensure both the tabletop and the protector are thoroughly cleaned and dried. Avoid using abrasive cleaning tools or harsh chemicals.

6. លក្ខណៈបច្ចេកទេស

រូបភាព 6៖ ទំហំផលិតផលលម្អិត និងលក្ខណៈបច្ចេកទេសសំខាន់ៗ។

7. ព័ត៌មានសុវត្ថិភាព

No specific safety warnings apply to this product. However, always exercise common sense precautions to avoid damage to the protector or exposure to extreme heat beyond its specified resistance. Keep out of reach of small children if not properly secured to prevent choking hazards from small pieces if torn or cut.

8. ការធានា និងការគាំទ្រ

For warranty information, technical support, or any inquiries regarding your VEVOR Plastic Table Cover, please refer to the official VEVOR website or contact their customer service directly. Ensure you have your model number (F085-1.5M-092155) available for faster assistance.