សេចក្តីផ្តើម
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ikea KALLROR 503.570.02 Stainless Steel Cabinet Handles. Please read these instructions carefully before proceeding with installation to ensure proper and safe use.
ផលិតផលលើសview
The Ikea KALLROR 503.570.02 handles are designed to offer a modern aesthetic and functional grip for your kitchen cabinets or drawers. This set includes two handles and all necessary screws for a complete installation.
This image displays two sleek, cylindrical stainless steel cabinet handles, along with four silver screws. The handles have a brushed finish, and each handle is shown with two mounting posts. The screws are designed to secure the handles to cabinet doors or drawers.
លក្ខណៈបច្ចេកទេស
| លេខម៉ូដែល | 503.570.02 |
| ម៉ាក | Ikea |
| បរិមាណក្នុងមួយឈុត | 2 ចំណុចទាញ |
| ប្រវែងដៃ | 213 ម។ |
| ដោះស្រាយជម្រៅ | 38 ម។ |
| Hole Spacing (center-to-center) | 160 ម។ |
| Drilled Hole Diameter | 5 ម។ |
| កម្រាស់ទ្វារសមរម្យ | 16 មមទៅ 21 មម |
| Handle/End Cap Material | ដែកអ៊ីណុក |
| Plastic Parts Material | ផ្លាស្ទិចប៉ូលីអេទីឡែន |
| សមាសធាតុរួមបញ្ចូល | ផ្នែករឹងដំឡើង (វីស) |
| ទម្ងន់ | 170 ក្រាម។ |
ការដំឡើងនិងការដំឡើង
Installing your Ikea KALLROR cabinet handles is a straightforward process. Follow these steps carefully for a secure attachment.
ឧបករណ៍ដែលត្រូវការ
- ខួង
- Drill bit (5 mm diameter)
- កាសែតវាស់ឬបន្ទាត់
- ខ្មៅដៃ
- ទួណឺវីស (ក្បាល Phillips ត្រូវបានណែនាំ)
ជំហានដំឡើង
- វាស់វែង និងសម្គាល់៖ Carefully measure and mark the desired position for the handle on your cabinet door or drawer front. Ensure the marks for the two screw holes are precisely 160 mm apart (center-to-center).
- រន្ធខួង៖ Using a 5 mm drill bit, carefully drill through the cabinet door or drawer front at the marked positions. Ensure the holes are straight and clean.
- ភ្ជាប់ចំណុចទាញ៖ Align the handle with the drilled holes. Insert the provided screws from the inside of the cabinet door or drawer through the drilled holes and into the handle posts.
- ចំណុចទាញសុវត្ថិភាព៖ Tighten the screws firmly with a screwdriver until the handle is securely attached. កុំរឹតបន្តឹង, as this may damage the cabinet material.
- ធ្វើម្តងទៀត៖ Repeat the process for the second handle if installing a set.
Important: These handles are suitable for door thicknesses between 16 mm and 21 mm. Verify your cabinet door thickness before drilling.
ប្រតិបត្តិការ
The Ikea KALLROR cabinet handles are designed for simple and reliable operation. Grasp the handle firmly to open or close cabinet doors and drawers as needed.
ថែទាំ
To ensure the longevity and appearance of your stainless steel handles, follow these maintenance guidelines:
- ការសម្អាត៖ ជូតជាប្រចាំដោយប្រើក្រណាត់ទន់ៗamp cloth. For stubborn marks, use a mild detergent solution. Avoid abrasive cleaners, scouring pads, or chemical solvents, as these can damage the stainless steel finish.
- ការសម្ងួត៖ Always dry the handles thoroughly after cleaning to prevent water spots and maintain their luster.
- អធិការកិច្ច៖ Periodically check the screws for tightness. If a handle feels loose, gently tighten the screws with a screwdriver.
ការដោះស្រាយបញ្ហា
Handle is Loose
If the handle feels loose, gently tighten the screws from the inside of the cabinet door or drawer. Ensure not to overtighten.
ភាពលំបាកក្នុងការដំឡើង
Ensure the drilled holes are precisely 160 mm apart (center-to-center) and that the drill bit used was 5 mm in diameter. Verify your cabinet door thickness is within the specified 16-21 mm range.
គាំទ្រ
For further assistance or inquiries regarding your Ikea KALLROR cabinet handles, please refer to the official Ikea webឬទាក់ទងសេវាកម្មអតិថិជន Ikea ដោយផ្ទាល់។
