ECOELER YM2601-WH

ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

Your guide to installation, operation, and maintenance of your ECOELER Motion Sensor Dimmer Switch.

1. សេចក្តីផ្តើម

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ECOELER PIR Motion Sensor Dimmer Switch with icons for advanced motion sensor, ambient light sensor, timer delay, fully dimmable, energy saving, and fire resistant features.

រូបភាព៖ ជាងview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

លក្ខណៈពិសេសនៃផលិតផល

ការគ្រប់គ្រងដោយដៃដោយឥតគិតថ្លៃ៖ Automatically detects presence and ambient light to activate or deactivate lights.
Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
ភាពឆបគ្នាជាសកល៖ Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
ការដំឡើងងាយស្រួល៖ Fits standard junction boxes and requires a neutral wire.
ការរចនាជាប់លាប់៖ Constructed with tough thermoplastic housing for impact and scratch resistance.

Diagram showing the adjustable settings on the ECOELER Motion Sensor Dimmer Switch, including dimmer level, time delay, sensitivity, ambient light, OCC/VAC mode, darkest brightness, and ON/OFF button.

រូបភាព៖ លម្អិត view of the product features and adjustable settings on the dimmer switch.

3. ព័ត៌មានសុវត្ថិភាព

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

ឧបករណ៍នេះត្រូវបានបម្រុងទុកសម្រាប់ការដំឡើងស្របតាមច្បាប់អគ្គិសនីជាតិ និងបទប្បញ្ញត្តិក្នុងស្រុក។
វាត្រូវបានណែនាំថា ជាងអគ្គិសនីដែលមានសមត្ថភាពអនុវត្តការដំឡើងនេះ។
ប្រើតែខ្សែស្ពាន់ប៉ុណ្ណោះ។
A neutral wire is required for proper operation.
This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. មាតិកាកញ្ចប់

ECOELER Motion Sensor Dimmer Switch
បន្ទះជញ្ជាំង
ការណែនាំអំពីការដំឡើង (សៀវភៅណែនាំនេះ)
វីសម៉ោន
មួកខ្សែភ្លើង

Image showing the ECOELER Motion Sensor Dimmer Switch with its dimensions, included wall plate, screws, and wiring caps.

រូបភាព៖ វិមាត្រផលិតផល និងគ្រឿងបន្ថែមដែលរួមបញ្ចូល។

5. លក្ខណៈបច្ចេកទេស

គុណលក្ខណៈ	តម្លៃ
លេខម៉ូដែល	YM2601-WH
វ៉ុលប្រតិបត្តិការtage	120 វ៉ុល (AC)
ការវាយតម្លៃបច្ចុប្បន្ន	10 Amps
អតិបរមាវ៉ាត់tage (អំពូល LED/CFL ដែលអាចបន្ថយពន្លឺបាន)	150 វ៉
អតិបរមាវ៉ាត់tagអ៊ី (អំពូលភ្លើង/ហាឡូហ្សែន)	300 វ៉
ប្រភេទប្តូរ	Single-pole (1-way)
ប្រភេទម៉ោន	ជញ្ជាំងម៉ោន
សម្ភារៈ	Copper, Metal, Polycarbonate
វិមាត្រ (L x W x H)	6.86 x 4.2 x 11.48 សង់ទីម៉ែត្រ
វិញ្ញាបនប័ត្រ	ETL, FCC

Image illustrating universal compatibility of the dimmer switch with incandescent, CFL, and dimmable LED lamps, showing their respective wattage ការវាយតម្លៃ។

Image: Universal compatibility with various bulb types and their wattage ការវាយតម្លៃ។

6. ការដំឡើង

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 ការដំឡើងជាមុន

បិទថាមពល៖ Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltagអ្នកសាកល្បង។
យកកុងតាក់ចាស់ចេញ៖ Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
កំណត់អត្តសញ្ញាណខ្សែ៖ Identify the following wires in your electrical box:
- Hot (Line) Wire: ផ្ទុកថាមពលពីឧបករណ៍បំបែកសៀគ្វី។
- ផ្ទុកខ្សែ៖ ភ្ជាប់ទៅនឹងឧបករណ៍បំភ្លឺ។
- ខ្សែអព្យាក្រឹត៖ (Required) Typically white, often capped together with other neutral wires.
- ខ្សែដី៖ (Recommended) Typically bare copper or green.

6.2 ការណែនាំអំពីខ្សែភ្លើង

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

ភ្ជាប់ ខ្មៅ wire from the switch to the Hot (Line) wire from the wall.
ភ្ជាប់ ក្រហម wire from the switch to the ផ្ទុក wire from the wall.
ភ្ជាប់ ស wire from the switch to the អព្យាក្រឹត wire from the wall.
ភ្ជាប់ បៃតង wire from the switch to the ដី wire from the wall.

Wiring diagram for the ECOELER Motion Sensor Dimmer Switch, showing connections for Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires in a single-pole circuit.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

៤.៣ ការម៉ោន និងការបញ្ចប់

Carefully push all wired connections into the electrical box.
Mount the switch into the electrical box using the provided screws.
ភ្ជាប់បន្ទះជញ្ជាំង។
បើកថាមពលឡើងវិញនៅឧបករណ៍បំបែកសៀគ្វី។

Video: Real installation and finished look of the ECOELER Motion Sensor Dimmer Switch.

7. សេចក្តីណែនាំប្រតិបត្តិការ

The ECOELER Motion Sensor Dimmer Switch offers flexible operation modes and customizable settings.

7.1 Sensor Modes (Occupancy vs. Vacancy)

The switch can be configured for two primary sensor modes:

របៀបកាន់កាប់ (បើកដោយស្វ័យប្រវត្តិ បិទដោយស្វ័យប្រវត្តិ): The lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected.
របៀបទំនេរ (បើកដោយដៃ បិទដោយស្វ័យប្រវត្តិ)៖ The lights must be manually turned ON, but will automatically turn OFF after a set time delay when no motion is detected.

Diagram illustrating the difference between Occupancy Mode (Auto ON, Auto OFF) and Vacancy Mode (Manual ON, Auto OFF) for the sensor switch.

Image: Comparison of Occupancy and Vacancy sensor modes.

Video: Explanation of motion sensor switch operating modes and ambient light level detection.

7.2 ការលៃតម្រូវការកំណត់

The switch features adjustable dials for Time Delay, Sensitivity, and Ambient Light Level. These are typically located under a removable cover on the switch face.

Diagram of the programmable sensor switch showing dials for Time, Sense (Sensitivity), and Light (Ambient Light Level), along with Menu and Select buttons for mode selection.

Image: Programmable sensor switch with adjustable dials for time, sensitivity, and light level.

ការពន្យារពេល៖ Adjust how long the lights remain ON after the last detected motion. Options include 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, and 30 minutes.
ភាពរសើប៖ Adjust the motion detection range. Higher sensitivity detects motion over a larger area.
Ambient Light Level: In Occupancy mode, this setting determines the ambient light threshold below which the sensor will turn on the lights. For example, set to 'Dark' for lights to only turn on in low light conditions.

Image showing the adjustable time delay, sensitivity, and ambient light level settings on the motion sensor switch.

Image: Adjustable settings for time delay, sensitivity, and ambient light level.

៥.២ មុខងារបន្ថយពន្លឺ

Use the dimmer button (typically a rocker switch or slider) to manually adjust the brightness of the connected lights. The digital control ensures smooth, flicker-free dimming.

Image demonstrating the digital dimming feature of the switch, showing different light levels in a study, dining room, and children's room.

Image: Digital dimming in action, illustrating various brightness levels.

8. ការដោះស្រាយបញ្ហា

ភ្លើងមិនបើកទេ៖
- ត្រូវប្រាកដថាថាមពលត្រូវបានបើកនៅឧបករណ៍បំបែកសៀគ្វី។
- Verify all wiring connections are secure and correct (Hot, Load, Neutral, Ground).
- Check if the bulb is working and properly installed.
- Adjust the ambient light level setting; if set too high, lights may not turn on in bright conditions.
- Increase sensitivity if motion is not being detected.
Lights do not turn OFF:
- Ensure no continuous motion is occurring within the sensor's range.
- Check the time delay setting; a longer delay will keep lights on for longer.
- Reduce sensitivity if the sensor is detecting motion from outside the desired area.
Lights flicker or dim improperly:
- Ensure you are using dimmable LED/CFL or incandescent/halogen bulbs. Non-dimmable bulbs may flicker.
- ផ្ទៀងផ្ទាត់ចំនួនសរុបtage of connected bulbs does not exceed the switch's maximum rating (150W for LED/CFL, 300W for Incandescent/Halogen).

9. ការថែទាំ

To ensure optimal performance and longevity of your ECOELER Motion Sensor Dimmer Switch:

ការសម្អាត៖ Wipe the switch and wall plate with a soft, damp ក្រណាត់។ កុំប្រើសារធាតុសម្អាត ឬសារធាតុរំលាយ។
ជៀសវាងការរារាំង៖ Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block motion detection.
ការត្រួតពិនិត្យជាប្រចាំ៖ Periodically check the switch for any loose connections or visible damage. If any issues are found, turn off power at the breaker and consult a qualified electrician.

10. ការធានា និងការគាំទ្រ

The ECOELER Motion Sensor Dimmer Switch comes with a ការធានារយៈពេល 1 ឆ្នាំ។, providing peace of mind regarding its quality and durability. For technical support, warranty claims, or any questions regarding your product, please contact ECOELER customer service.

ក្រុមហ៊ុនផលិត៖ ECOELER ELECTRIC INC

ទំនាក់ទំនង៖ SUPPORTS@ECOELER.COM

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.