Saooer Solar Charge Controller 12V/24V 30A User Manual

1. សេចក្តីផ្តើម

This manual provides essential instructions for the safe and efficient operation of your Saooer Solar Charge Controller. This device is designed to manage the power flow from your solar panel to your battery, ensuring optimal charging and protecting your battery from overcharge and over-discharge. It is compatible with both 12V and 24V solar systems and features a 30A discharge current capacity.

2. សេចក្តីណែនាំអំពីសុវត្ថិភាព

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the controller, battery, or other components, and may cause personal injury.

• ត្រូវប្រាកដថាវ៉ុលថ្មtage is sufficient for the controller to recognize the battery type before the first installation.
• The charge controller is suitable for lead-acid batteries (OPEN, AGM, GEL) and lithium-ion batteries. Do not use it for other battery types.
• Install the charge controller indoors, away from direct sunlight, high temperatures, and humid environments.
• The controller will heat up during operation; ensure good ventilation.
• The controller's positive and negative terminals should be connected correctly. Reverse connection may damage the device.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.

លក្ខណៈពិសេសនៃផលិតផល

• វ៉ុលប្រព័ន្ធtage ភាពឆបគ្នា៖ Automatically detects 12V or 24V systems.
• ចរន្តបញ្ចេញ៖ សមត្ថភាព 30A ។
• Integrated Micro Controller: Manages solar panel and battery operation efficiently.
• ច្រក USB ពីរ: Supports mobile phone charging (5V/2A output).
• ការការពារដ៏ទូលំទូលាយ៖ Includes short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection to enhance system efficiency and battery lifespan.
• អេក្រង់ LCD៖ Provides clear indication of status and data, allowing for convenient mode switching and parameter configuration.
• ប៉ារ៉ាម៉ែត្រដែលអាចលៃតម្រូវបាន៖ User-configurable settings for various battery types and operational needs.
• ភ្ជាប់មកជាមួយកម្មវិធីកំណត់ពេលវេលា៖ For load control.

4. មាតិកាកញ្ចប់

• 1x Saooer Solar Charge Controller (30A)

5. ការដំឡើងនិងការដំឡើង

Follow these steps for proper installation of the solar charge controller. Incorrect connection order can damage the controller.

1. ភ្ជាប់ថ្ម៖ Connect the battery to the charge regulator first. Ensure correct polarity (positive to positive, negative to negative). This allows the controller to recognize the battery voltage.
2. ភ្ជាប់បន្ទះថាមពលព្រះអាទិត្យ៖ Connect the solar panel to the solar charge controller. Ensure correct polarity.
3. ភ្ជាប់បន្ទុក៖ Connect the consumer or load to the charge controller regulator. Ensure correct polarity.

Important Disconnection Note:

When disconnecting the system, always remove the solar panel connection first, then the load connection, and finally the battery connection. This prevents potential damage to the controller.

6. សេចក្តីណែនាំប្រតិបត្តិការ

The controller features an LCD display and three buttons for operation: ម៉ឺនុយ, UP, និង ចុះ.

6.1. អេក្រង់ LCD

The LCD display shows real-time system status and data, including battery voltage, charging current, discharging current, and various parameter settings.

6.2. មុខងារប៊ូតុង

• ប៊ូតុង MENU៖ Press to cycle through different display modes and enter parameter setting mode. Long press to exit setting mode.
• ប៊ូតុងឡើងលើ៖ In setting mode, press to increase the parameter value.
• ប៊ូតុងចុះ៖ In setting mode, press to decrease the parameter value.

6.3. ការកំណត់ប៉ារ៉ាម៉ែត្រ

To adjust parameters (e.g., battery type, charge/discharge voltage limits, load timer settings):

1. ចុច ម៉ឺនុយ button until the desired parameter display appears.
2. ចុចឱ្យយូរ ម៉ឺនុយ button until the displayed value starts flashing.
3. ប្រើ UP និង ចុះ ប៊ូតុងដើម្បីលៃតម្រូវតម្លៃ។
4. Once the desired value is set, long press the ម៉ឺនុយ button again to save the setting and exit the flashing state.

Refer to the specific icons on the LCD for detailed parameter identification.

7. ការថែទាំ

ការថែទាំជាប្រចាំធានានូវអាយុកាលប្រើប្រាស់បានយូរ និងដំណើរការល្អបំផុតនៃឧបករណ៍បញ្ជាសាកថាមពលព្រះអាទិត្យរបស់អ្នក។

• អនាម័យ៖ រក្សាឧបករណ៍បញ្ជាឱ្យស្អាត និងគ្មានធូលី និងកំទេចកំទី។ ប្រើក្រណាត់ស្ងួតសម្រាប់សម្អាត។
• ការតភ្ជាប់៖ Periodically check all wiring connections to ensure they are tight and free from corrosion. Loose connections can cause power loss and overheating.
• ខ្យល់ចេញចូល៖ Ensure the installation area has adequate ventilation to prevent overheating of the controller.
• អធិការកិច្ច៖ Inspect the controller for any signs of physical damage or unusual operation.

8. ការដោះស្រាយបញ្ហា

If you encounter issues with your solar charge controller, consider the following common troubleshooting steps:

• គ្មានអេក្រង់/គ្មានថាមពល៖ ពិនិត្យមើលការតភ្ជាប់ថ្ម ហើយត្រូវប្រាកដថាថ្មមានវ៉ុលគ្រប់គ្រាន់tage. Verify all wiring is correct and secure.
• ថ្មមិនសាក៖ Check solar panel connections and ensure the panel is receiving adequate sunlight. Verify solar panel voltage and current. Ensure the controller's charging parameters are correctly set for your battery type.
• បន្ទុកមិនដំណើរការ៖ Check load connections. Ensure the load is not exceeding the controller's rated current. Check the load timer settings if applicable. The controller may have entered protection mode due to over-discharge or over-load; check the display for error codes or indicators.
• វ៉ុលលើសtage/Under-Voltage Alarms: ពិនិត្យវ៉ុលថ្មtage. Ensure solar panel open-circuit voltage does not exceed the controller's maximum input voltage.

If the problem persists after performing these checks, please contact customer support.

9. លក្ខណៈបច្ចេកទេស

10. ការធានា និងការគាំទ្រ

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or inquiries, please contact Saooer customer service through their official channels.