XFOX Tuya Zigbee Door and Window Sensor (Model F-SD01Z) Instruction Manual

1. សេចក្តីផ្តើម

This manual provides detailed instructions for the installation, setup, and operation of your XFOX Tuya Zigbee Door and Window Sensor. This wireless mini contact sensor is designed to monitor the open/closed status of doors and windows. It requires a compatible Tuya Zigbee hub for functionality and integrates with the Tuya Smart Life ecosystem, as well as voice assistants like Alexa and Google Assistant.

Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

2. ផលិតផលលើសview

2.1 មាតិកាកញ្ចប់

• XFOX Tuya Zigbee Door and Window Sensor (Main Unit)
• សមាសធាតុមេដែក
• Adhesive Pads / Mounting Screws (may vary by package)
• សៀវភៅណែនាំអ្នកប្រើ (ឯកសារនេះ)

ចំណាំ៖ 2x AAA batteries are required and not included in the package.

2.2 លក្ខណៈសំខាន់ៗ

• Wireless Intelligent Connection: Utilizes Tuya Zigbee 3.0 technology for easy integration with a Tuya smart home system (requires Tuya Zigbee gateway).
• Real-time Alarm Push: Monitors door/window status and sends instant notifications to your mobile application upon detecting abnormal movement.
• ភាពត្រូវគ្នានៃការគ្រប់គ្រងសំឡេង៖ Supports status queries via Alexa and Google Assistant, enabling automated security scenes with other smart devices.
• ការថែទាំទាប៖ Designed for low power consumption, offering extended battery life with 2x AAA batteries.
• Invisible and Slim Design: Compact form factor with dual mounting options (3M adhesive sticker/screws) for discreet placement.

Figure 1: XFOX Tuya Zigbee Door and Window Sensors with App Interface

3. រៀបចំ

3.1 ការដំឡើងថ្ម

1. Locate the main unit of the sensor.
2. Gently slide the back cover of the main unit downwards to open the battery compartment.
3. បញ្ចូលថ្ម AAA ចំនួនពីរ (2) ធានាប៉ូលត្រឹមត្រូវ (+/-) ។
4. Slide the back cover upwards until it clicks into place, securing the battery compartment.

សំខាន់៖ Ensure batteries are inserted correctly. Incorrect insertion may damage the device.

3.2 Pairing with Tuya Zigbee Hub

This sensor requires a Tuya Zigbee hub (sold separately) to function. Ensure your hub is powered on and connected to your network.

1. ទាញយក Tuya Smart Life application from your smartphone's app store (iOS or Android).
2. Register or log in to your Tuya Smart Life account.
3. Add your Tuya Zigbee hub to the app if you haven't already.
4. In the Tuya Smart Life app, navigate to your Zigbee hub and select "Add sub-device" or "Add device".
5. Follow the on-screen instructions in the app to put the hub into pairing mode.
6. On the sensor, press and hold the reset button (usually a small pinhole button) for approximately 5 seconds until the indicator light flashes rapidly, indicating it is in pairing mode.
7. The app should detect the sensor. Once detected, confirm the addition and assign it a name and location.

ចំណាំ៖ For optimal pairing, ensure the sensor is within close proximity (approximately 3-5 feet) of the Zigbee hub during the pairing process. Once paired, the sensor can operate at a greater distance within the Zigbee network range.

Figure 2: Tuya Zigbee Hub Requirement for Sensor Operation

4. ការដំឡើង

The sensor consists of two parts: a main unit and a magnet component. These two parts must be installed on a door or window and its frame, ensuring they are aligned and within the specified gap when the door/window is closed.

4.1 ទីតាំងម៉ោន

• Choose a clean, dry, and flat surface on your door/window frame and the corresponding moving part (door/window).
• The main unit should be installed on the fixed frame, and the magnet component on the moving part.
• Ensure the alignment marks on both parts face each other when the door/window is closed.

4.2 Mounting Methods

The sensor supports two mounting methods: adhesive pads or screws.

1. ការ​ដំឡើង​សារធាតុ​ស្អិត​:
   • សម្អាតផ្ទៃដំឡើងឱ្យបានហ្មត់ចត់។
   • Peel off the protective film from the adhesive pads and firmly attach one pad to the back of the main unit and the other to the back of the magnet component.
   • Press the sensor parts onto the desired locations for at least 30 seconds.
2. ការម៉ោនវីសៈ
   • Open the back covers of both the main unit and the magnet component.
   • Use the provided screws to secure the back covers to the door/window frame and the moving part.
   • Snap the main unit and magnet component onto their respective secured back covers.

Figure 3: Sensor Dimensions and Installation Steps

4.3 Gap Requirement

For accurate detection, the gap between the main unit and the magnet component must be no more than 0.86 inches (approximately 2.2 cm) when the door or window is closed.

Figure 4: Maximum Allowed Gap for Sensor Operation

5. សេចក្តីណែនាំប្រតិបត្តិការ

5.1 Monitoring with Tuya Smart Life App

Once the sensor is successfully paired and installed, you can monitor its status through the Tuya Smart Life application:

• Open the Tuya Smart Life app on your smartphone.
• Navigate to the specific sensor device.
• The app will display the current status (open or closed) of the door or window.
• You will receive real-time push notifications on your phone if the door or window opens unexpectedly, based on your configured settings.

Figure 5: App Notification for Door/Window Opening

5.2 Voice Control with Alexa and Google Assistant

The XFOX Tuya Zigbee Door and Window Sensor is compatible with Amazon Alexa and Google Assistant. To enable voice control:

1. Ensure your Tuya Smart Life account is linked to your Alexa or Google Home account through their respective applications.
2. Once linked, you can use voice commands to check the status of your sensor.

Example ពាក្យបញ្ជា៖

• "Alexa, is the front door open?"
• "Hey Google, what's the status of the living room window?"

Figure 6: Voice Control Integration with Alexa and Google Assistant

6. ការថែទាំ

6.1 ការជំនួសថ្ម

The sensor is designed for low power consumption, providing extended battery life. When the battery level is low, you may receive a notification through the Tuya Smart Life app. Replace the batteries as follows:

1. Gently slide the back cover of the main unit downwards to open the battery compartment.
2. ដោះថ្ម AAA ចាស់ចេញ។
3. បញ្ចូលថ្ម AAA ថ្មីពីរ ដោយធានាថាប៉ូលារីតត្រឹមត្រូវ (+/-)។
4. Slide the back cover upwards until it clicks into place.

ចោល​ថ្ម​ដែល​ប្រើ​រួច​ទៅ​តាម​បទបញ្ញត្តិ​ក្នុង​តំបន់។

7. ការដោះស្រាយបញ្ហា

• Sensor not pairing with hub:
  • Ensure the sensor is within 3-5 feet of the Tuya Zigbee hub during the pairing process.
  • Verify that the hub is powered on and connected to your network.
  • Check if the sensor's indicator light is flashing rapidly, indicating pairing mode. If not, re-initiate pairing mode.
  • Confirm that you are using a compatible Tuya Zigbee hub.
• Sensor not detecting open/closed status reliably:
  • Check the gap between the main unit and the magnet component. It must be no more than 0.86 inches when closed.
  • Ensure both parts are securely mounted and aligned correctly.
  • ជំនួសថ្មប្រសិនបើវាទាប។
  • Verify the sensor's connection to the Zigbee hub in the Tuya Smart Life app.
• No notifications received:
  • Check your smartphone's notification settings for the Tuya Smart Life app.
  • Ensure the sensor is online and communicating with the hub.
  • Verify that notification rules are correctly set up within the Tuya Smart Life app.

8. លក្ខណៈបច្ចេកទេស

9. ការធានា និងការគាំទ្រ

Information regarding product warranty is not provided in this manual. For warranty details or technical support, please contact the manufacturer, XFOX, or your point of purchase. Please have your model number (F-SD01Z) and purchase information ready when contacting support.