សេចក្តីផ្តើម
This manual provides essential information for the safe and efficient operation of your OMTech 50W Fiber Laser Engraver. Please read thoroughly before use.
ព័ត៌មានសុវត្ថិភាព
- Always wear protective eyewear (safety goggles included) when operating the laser engraver.
- Ensure proper ventilation to avoid inhaling fumes during engraving.
- Familiarize yourself with the emergency stop button location and function.
- Do not operate the machine rapidly or out of sequence; allow a 3-second interval between operations.
- This is a Class 2 laser product (0.874 mW output power).
ការណែនាំអំពីការដំឡើង
ការវេចខ្ចប់ និងការជួបប្រជុំដំបូង
Carefully unpack all components from the shipping crate. Ensure all parts listed in the packing list are present.
ការពិពណ៌នាវីដេអូ៖ This video demonstrates the step-by-step installation process for the OMTech fiber laser engraver, including attaching the laser arm and connecting components.
ការពិពណ៌នាវីដេអូ៖ A detailed guide on setting up your OMTech laser engraver, covering initial assembly and connections.
ការកំណត់អត្តសញ្ញាណសមាសធាតុ
ការពិពណ៌នារូបភាព៖ ការមើលឃើញview of the main components of the OMTech 50W Fiber Laser Engraver, including the main unit, laser arm, and control panel.
ការភ្ជាប់ថាមពល និង USB
Connect the power cable to a standard 110V power supply. Connect the machine to your computer via the provided USB cable.
ការពិពណ៌នាវីដេអូ៖ This video provides a comprehensive setup guide for the compact fiber marker, detailing how to connect the power, USB, and other essential components.
Software Installation (EzCad2)
Install the EzCad2 software from the provided USB drive. Ensure drivers are correctly installed via Device Manager.
ការពិពណ៌នារូបភាព៖ An image showing the EzCad2 software interface on a laptop, which is used to control the OMTech 50W Fiber Laser Engraver.
សេចក្តីណែនាំប្រតិបត្តិការ
Focusing the Laser
Use the red dot pointer for precise calibration and focusing. Adjust the laser arm height until the two red dots converge into one for optimal focus.
ការពិពណ៌នារូបភាព៖ This image illustrates the red dot guidance system, which helps in precisely focusing the laser on the material before engraving.
ដំណើរការឆ្លាក់
Import your design into EzCad2, set engraving parameters (speed, power, frequency), and preview the engraving area using the frame function. Wear safety goggles before initiating engraving.
ការពិពណ៌នាវីដេអូ៖ A short video demonstrating the OMTech fiber laser engraver in action, showing the laser marking a surface.
ការពិពណ៌នាវីដេអូ៖ This video shows the OMTech fiber laser engraver working with a rotary axis to engrave cylindrical objects.
ការពិពណ៌នារូបភាព៖ This image highlights the professional precision achieved by the OMTech engraver, showcasing fine details on an engraved design.
Rotary Axis Operation (Optional)
For engraving curved surfaces, connect a compatible rotary axis (not included) to the 4-pin port.
ការពិពណ៌នារូបភាព៖ An image depicting the OMTech fiber laser engraver set up to engrave on curved surfaces using an optional rotary axis.
ថែទាំ
Regularly clean the lens and work area to ensure optimal performance. Refer to the user manual for detailed cleaning procedures and recommended maintenance schedules.
The laser source has an average service life of over 100,000 hours, requiring minimal maintenance for the laser unit itself.
ការដោះស្រាយបញ្ហា
បញ្ហាទូទៅ និងដំណោះស្រាយ
- ឡាស៊ែរមិនបាញ់៖ Check power connections, emergency stop button, and ensure the "Fiber Laser" button is pressed. Verify the "Scan Head" key is turned to the ON position.
- Poor engraving quality: Re-check focal length using the red dot pointer. Ensure material is clean and flat on the workbed. Adjust engraving parameters (speed, power) in the software.
- Software not recognizing machine: Reinstall USB drivers from the provided USB drive. Check USB cable connection.
លក្ខណៈបច្ចេកទេស
- លេខម៉ូដែល៖ LYF-50W
- ថាមពលឡាស៊ែរ៖ 50W Solid-State Fiber Laser
- ថ្នាក់ឡាស៊ែរ៖ 2 (0.874 mW output power)
- តំបន់ការងារ៖ 7.9 x 7.9 អ៊ីញ (200 x 200 មម)
- ល្បឿនឆ្លាក់៖ រហូតដល់ 10,000 mm / s
- Engraving Precision: 0.01 ម។
- Per-Pass Depth: 0.1 ម។
- Laser Source Life: ជាង 100,000 ម៉ោង។
- ភាពត្រូវគ្នានៃកម្មវិធី៖ EzCad2 (Windows), LightBurn compatible
- ទំហំផលិតផល៖ 30.5 x 17.7 x 31.1 អ៊ីញ
- សមត្ថភាពសម្ភារៈ៖ រហូតដល់ 44.1 ផោន។
ការធានា និងការគាំទ្រ
This product includes a 30-day return policy for refund or replacement. For specific warranty details beyond this period, please contact OMTech Direct.
OMTech offers U.S.-based technical support and 24/7 online customer service. Our teams are available Monday to Friday, 8:30 AM to 4:30 PM PST.
សម្រាប់ការគាំទ្រ សូមចូលទៅកាន់គេហទំព័រ OMTech Store on Amazon or contact support@omtechlaser.com.
ធនធានបន្ថែម
For further assistance and community engagement, consider joining official laser user groups on Facebook or checking instructional videos on the OMTech YouTube channel.
A QR code is provided on the machine for the latest version of the user manual and additional resources.
ការពិពណ៌នារូបភាព៖ A product image showing the OMTech 50W Fiber Laser Engraver, with a visible QR code that links to the latest user manual and support resources.