Luqeeg Digital Door Viewសៀវភៅណែនាំអ្នកប្រើ

1. សេចក្តីផ្តើម

This manual provides detailed instructions for the installation, operation, and maintenance of your Luqeeg Digital Door Viewer. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.

លក្ខណៈពិសេសនៃផលិតផល

• អេក្រង់ LCD ទំហំ 2.4 អ៊ីញ៖ Provides a clear and vivid view of visitors at your door.
• 0.3MP Professional Camera: Captures crisp images for easy identification, even in low light conditions.
• 120° Wide-Angle Lens៖ Offers a broad view of your doorstep, minimizing blind spots and enhancing security.
• សំណង់ស័ង្កសីដែលប្រើបានយូរ៖ Engineered for superior wear resistance and impact strength, preventing prying and smashing.
• ការផ្គត់ផ្គង់ថាមពលពីរ៖ Operates using either 3 x 1.5V AAA batteries (not included) or a 5V 1A USB power source for continuous operation.
• ការធ្វើឱ្យសកម្មការបង្ហាញដោយស្វ័យប្រវត្តិ៖ The screen automatically displays the outside view when the doorbell is pressed, providing convenience for all users.

3. មាតិកាកញ្ចប់

ផ្ទៀងផ្ទាត់ថាធាតុទាំងអស់មាននៅក្នុងកញ្ចប់៖

• ទ្វារឌីជីថល 1 x Viewer Camera Unit
• ទ្វារឌីជីថល 1 x Viewer Monitor Unit
• 1 x Accessory Kit (includes 2 x Washers, 8 x Screws)
• 1 x សៀវភៅណែនាំអ្នកប្រើប្រាស់

Note: AAA batteries and a small memory card are not included and must be purchased separately.

4. ផលិតផលលើសview

Familiarize yourself with the components of your Luqeeg Digital Door Viewអេ

Figure 4.1: Monitor Unit Components

• អេក្រង់ LCD៖ បង្ហាញការផ្សាយបន្តផ្ទាល់ view ពីកាមេរ៉ា។
• Monitoring/Power On/Off Button: Press to activate the screen or power the device on/off.
• ចំណុចប្រទាក់ USB៖ For connecting a 5V 1A USB power source.
• Small Memory Card Slot: Insert a memory card (not included) for potential recording features (if supported by firmware).

Figure 4.2: Monitor Unit Rear View (Battery Compartment)

• ប្រអប់ដាក់ថ្ម៖ Houses 3 x AAA batteries (not included).

5. ការណែនាំតំឡើង

The Luqeeg Digital Door Viewer is designed for simple installation, fitting standard door peephole holes without requiring special tools.

០២ ការរៀបចំ

• Ensure your door has an existing peephole or a suitable hole for installation.
• Gather necessary components: Camera unit, Monitor unit, washers, and screws.
• Prepare 3 x AAA batteries (not included) or a 5V 1A USB power source.

5.2 ជំហានដំឡើង

Figure 5.1: Installation Overview

1. Step 1: Remove Existing Peephole (if applicable)
   Carefully unscrew and remove any existing traditional peephole from your door.
2. Step 2: Insert Camera Unit
   From the outside of the door, insert the camera unit through the peephole hole. Ensure the camera is facing outwards and is flush with the door surface.
3. Step 3: Secure Monitor Unit
   From the inside of the door, connect the cable from the camera unit to the monitor unit. Align the monitor unit with the camera unit and secure it to the door using the provided screws and washers. Ensure the monitor is firmly attached and stable.

5.3 ថាមពលឧបករណ៍

• ថាមពលថ្ម៖ Open the battery compartment on the back of the monitor unit and insert 3 x AAA batteries, observing correct polarity.
• ថាមពល USB: Connect a 5V 1A USB power adapter (not included) to the USB interface on the side of the monitor unit. This can serve as a backup or primary power source.

6. សេចក្តីណែនាំប្រតិបត្តិការ

6.1 ការបើក/បិទ

• ដើម្បីបើកដំណើរការ៖ Press and hold the Monitoring/Power On/Off button located below the LCD screen until the screen illuminates.
• ដើម្បីបិទថាមពល៖ Press and hold the Monitoring/Power On/Off button until the screen turns off.

6.2 Viewក្នុង​អ្នក​ទស្សនា

• សៀវភៅដៃ View: Press the Monitoring/Power On/Off button once to activate the screen and view the outside area. The screen will automatically turn off after a short period of inactivity to conserve power.
• ស្វ័យប្រវត្តិ View: When someone presses your doorbell (if connected and compatible, or if the device detects motion/sound, depending on model features), the screen will automatically activate and display the outside view.

រូបភាពទី 6.1៖ Viewing a Visitor

6.3 Memory Card Usage (Optional)

If your model supports recording and you have inserted a small memory card into the slot:

• Refer to the on-screen menu or additional documentation for specific instructions on how to initiate recording, view playback, or manage stored footage.

7. ការថែទាំ

• ការសម្អាត៖ ប្រើក្រណាត់ទន់ស្ងួតដើម្បីសម្អាតអេក្រង់ និងកែវកាមេរ៉ា។ ជៀសវាងទឹកសម្អាតដែលមានជាតិស្អិត ឬសារធាតុរំលាយ។
• ការជំនួសថ្ម៖ When the battery indicator shows low power, replace all 3 AAA batteries simultaneously. Do not mix old and new batteries.
• លក្ខខណ្ឌបរិស្ថាន៖ Ensure the device is not exposed to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

8. ការដោះស្រាយបញ្ហា

9. លក្ខណៈបច្ចេកទេស

10. ការគាំទ្រ

For any questions, technical assistance, or support regarding your Luqeeg Digital Door Viewer, please refer to the contact information provided with your purchase or visit the official Luqeeg website. Our customer support team is available to assist you.