សៀវភៅណែនាំអ្នកប្រើប្រាស់ SPI 31-040-9 ឧបករណ៍វាស់ស្ទង់ឌីជីថល PRO3600

1. សេចក្តីផ្តើម

The SPI 31-040-9 Digital Protractor PRO3600 is a revolutionary tool designed to provide immediate digital indications of level, plumb, and angles. It features a light, rigid, and ultra-precise platform, utilizing a state-of-the-art sensor and microprocessor circuit for accurate readings. This instrument is built for durability, precision, and reliability, making it an essential tool for various metalworking and laboratory applications.

លក្ខណៈសំខាន់ៗ៖

• Floating zero provides zero selection anywhere within its 360° range.
• PRO 3600 features SPC output and excellent accuracy.
• Instant LCD Display with resolution of 0.1° up to +/-10°.
• Deviation from the true plane is measurable through full 360° (4x90°).
• Supplied in a protective plastic case.
• Top plate has a V-groove for accurate registration on curved or cylindrical surfaces.

2. ផលិតផលលើសview

Familiarize yourself with the main components and controls of your SPI PRO3600 Digital Protractor.

3. រៀបចំ

3.1 ការដំឡើងថ្ម

The SPI PRO3600 is battery powered. To install or replace batteries:

1. Locate the battery compartment cover, typically on the underside or side of the unit.
2. Open the cover using a small screwdriver or coin if necessary.
3. Insert the required batteries (refer to the battery type indicated inside the compartment, usually AAA or button cell) ensuring correct polarity (+/-).
4. បិទគម្របប្រអប់ថ្មដោយសុវត្ថិភាព។

3.2 ការបើកថាមពលដំបូង

After battery installation, press the បើក/បិទ button to power on the device. The LCD display should illuminate and show a reading.

4. សេចក្តីណែនាំប្រតិបត្តិការ

4.1 បើក/បិទថាមពល

• ដើម្បីបង្វែរឯកតា ON, ចុច បើក/បិទ ប៊ូតុង។
• ដើម្បីបង្វែរឯកតា បិទ, ចុច បើក/បិទ ប៊ូតុងម្តងទៀត។
• The unit will automatically shut off after 6 minutes of non-use to conserve battery life.

4.2 Zeroing (ALT ZERO)

The floating zero feature allows you to set a reference point anywhere within the 360° range.

1. Place the unit on your chosen reference surface.
2. Wait approximately 5 seconds for the reading to stabilize.
3. ចុច ALT ZERO button. The display will reset to 0.0°, establishing this as your new reference.
4. To return to the original absolute reference (factory zero), press the ALT ZERO ប៊ូតុងម្តងទៀត។

4.3 Holding a Reading

ដើម្បីបង្កកការអានបច្ចុប្បន្ននៅលើអេក្រង់៖

• ចុច កាន់ button. The displayed reading will be frozen.
• To unfreeze the display and resume live readings, press the កាន់ ប៊ូតុងម្តងទៀត។

4.4 SPC Output

The PRO3600 features an SPC (Statistical Process Control) output port. This allows for data transfer to external devices for analysis. Refer to the manual for your specific SPC data collection system for connection and usage instructions.

4.5 Measuring Angles

Place the base of the protractor firmly on the surface you wish to measure. The digital display will show the angle relative to the last set zero point. For absolute measurements, ensure the unit is zeroed on a true horizontal surface.

4.6 Using the V-Groove

The top plate of the protractor features a V-groove. This design allows for accurate registration and measurement on curved or cylindrical surfaces, such as pipes or shafts. Simply align the V-groove with the cylindrical object to obtain a stable and accurate reading.

5. ការថែទាំ

5.1 ការសម្អាត

• ជូតឧបករណ៍ដោយក្រណាត់ទន់និងស្ងួត។
• សម្រាប់ភាពកខ្វក់រឹងចចេស ឃamp អ្នកអាចប្រើក្រណាត់ដែលមានសាប៊ូស្រាល បន្ទាប់មកជូតឱ្យស្ងួតភ្លាមៗ។
• កុំប្រើសារធាតុសម្អាតដែលមានជាតិសំណឹក សារធាតុរំលាយ ឬជ្រលក់ឧបករណ៍ក្នុងទឹក។

5.2 ការផ្ទុក

• Store the protractor in its supplied plastic case when not in use to protect it from dust, dirt, and physical damage.
• Store in a dry environment, away from extreme temperatures and direct sunlight.
• ប្រសិនបើរក្សាទុកក្នុងរយៈពេលយូរ សូមដកថ្មចេញ ដើម្បីការពារការលេចធ្លាយ។

6. ការដោះស្រាយបញ្ហា

• ឯកតាមិនបើកទេ៖ ពិនិត្យមើលការដំឡើងថ្ម និងធានាថាថ្មមិនអស់។ ជំនួសបើចាំបាច់។
• ការអានមិនត្រឹមត្រូវ៖ Ensure the measurement surface is clean and stable. Perform an ALT ZERO calibration on a known true reference surface.
• Unit shuts off unexpectedly: The unit has an automatic shut-off feature after 6 minutes of non-use. This is normal operation. If it shuts off during active use, check battery levels.
• ការបង្ហាញមានភាពស្រអាប់ ឬភ្លឹបភ្លែតៗ៖ ថ្ម​អាច​នឹង​អស់។ សូម​ប្ដូរ​វា​ចេញ។

7. លក្ខណៈបច្ចេកទេស

8. ការធានា និងការគាំទ្រ

8.1 ព័ត៌មានធានា

SPI measuring instruments are backed by an industry-leading 2-Year warranty, ensuring their durability, precision, and reliability. Please retain your proof of purchase for warranty claims.

8.2 ជំនួយអតិថិជន

For technical assistance, warranty service, or inquiries regarding your SPI PRO3600 Digital Protractor, please contact SPI customer support through their official webគេហទំព័រ ឬអ្នកលក់រាយដែលអ្នកបានទិញផលិតផល។