MOUNT PRO Triple Monitor Mount User Manual

1. សេចក្តីផ្តើម

This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNT PRO Triple Monitor Mount. Please read this manual thoroughly before installation to ensure correct setup and safe usage. Keep this manual for future reference.

2. ព័ត៌មានសុវត្ថិភាព

សេចក្តីណែនាំសុវត្ថិភាពសំខាន់ៗ៖

• Ensure your desk surface is stable and capable of supporting the combined weight of the mount and all monitors.
• កុំ​ផ្ទុក​លើស​ចំណុះ​អតិបរមា 17.6 ផោន (8 គីឡូក្រាម) ក្នុងមួយដៃ។
• Use only the provided hardware. If any parts are missing or damaged, contact MOUNT PRO customer service.
• ការដំឡើងមិនត្រឹមត្រូវអាចបណ្តាលឱ្យខូចខាតទ្រព្យសម្បត្តិឬរបួសផ្ទាល់ខ្លួន។
• Adjust gas spring tension carefully. Refer to the adjustment section for proper procedure.

3. មាតិកាកញ្ចប់

Verify that all components are present before beginning installation. While a complete list is not provided, typical components include:

• Main Pole and Base (C-Clamp and Grommet options)
• Monitor Arms (Gas Spring Arms)
• ចាន VESA
• ឈុតគ្រប់គ្រងខ្សែ
• Hardware Kit (screws, washers, Allen wrenches)

Image: Typical package contents for the MOUNT PRO Triple Monitor Mount.

4. ការដំឡើងនិងការដំឡើង

The MOUNT PRO Triple Monitor Mount offers two installation methods: C-Clamp and Grommet mounting. Choose the method suitable for your desk.

4.1. ជ្រើសរើសវិធីសាស្ត្រម៉ោន

រូបភាព៖ រូបភាពនៃ C-Clamp និងជម្រើសម៉ោន Grommet ។

• ស៊ី-ក្លamp ការដំឡើង៖ Fits desks with a thickness of 0.39" - 3.15" (10mm - 80mm).
• ការដំឡើង Grommet: Fits desks with a thickness of 0.39" - 1.97" (10mm - 50mm) and requires an existing hole in the desk.

4.2. Base Assembly (C-Clamp)

1. Attach the L-plate to the bottom of the pole base using the provided screws.
2. ធានា C-clamp to the L-plate.
3. Place the assembled base onto your desk and tighten the C-clamp to secure it firmly.

4.3. Base Assembly (Grommet)

1. If using grommet mounting, detach the bolt from the C-clamp ការជួបប្រជុំគ្នា។
2. Insert the grommet bolt through the desk hole and secure it from underneath with the washer and nut.
3. Attach the pole base to the grommet bolt.

4.4. Pole Installation

1. Connect the upper and lower sections of the pole and secure them with the provided screw.
2. Slide the pole onto the mounted base and tighten the securing screw.

4.5. Arm and VESA Plate Installation

1. Slide the cable clips and fixators onto the pole at desired heights.
2. Attach the monitor arms to the pole, securing them with the fixators.
3. Attach the VESA plates to the back of your monitors using the appropriate screws. Ensure the screws are tightened securely.

Image: Attaching the VESA plate to the back of a monitor.

4.6. Attaching Monitors

1. Carefully slide each monitor (with VESA plate attached) onto the head of its respective arm.
2. Secure the monitor to the arm by tightening the locking screw on the VESA head.

5. ប្រតិបត្តិការ និងការកែតម្រូវ

The MOUNT PRO Triple Monitor Mount offers extensive adjustability for optimal viewការលួងលោម។

៦.១. ការលៃតម្រូវភាពតានតឹងនិទាឃរដូវឧស្ម័ន

The gas spring arms allow for smooth height adjustments. Adjust the tension based on your monitor's weight.

• ប្រសិនបើម៉ូនីទ័រ raises up, turn the tension screw counter-clockwise ("-" direction) to reduce tension for a lighter monitor.
• ប្រសិនបើម៉ូនីទ័រ falls down, turn the tension screw clockwise ("+" direction) to increase tension for a heavier monitor.
• Keep the arm in a horizontal position during adjustment.

Image: Instructions for adjusting gas spring tension.

5.2. Tilt, Swivel, and Rotation

• លំអៀង៖ Adjust your screen from +90° to -90° for vertical angle. Loosen the tilting bolt, adjust, then retighten.
• បង្វិល៖ Swivel the monitor 180° for horizontal angle adjustment.
• ការបង្វិល៖ បង្វិលម៉ូនីទ័រ 360° ដើម្បីប្តូររវាងទិសផ្ដេក និងបញ្ឈរ។

Image: Visual representation of tilt, swivel, and rotation adjustments.

ការគ្រប់គ្រងខ្សែកាប

ប្រើប្រាស់ប្រព័ន្ធគ្រប់គ្រងខ្សែដែលរួមបញ្ចូលគ្នា ដើម្បីរក្សាកន្លែងធ្វើការរបស់អ្នកឱ្យមានសណ្តាប់ធ្នាប់។

1. Route monitor cables through the cable clips on the arms and along the main pole.
2. Secure the cable covers on the arms to conceal the cables.

6. ការថែទាំ

ការថែទាំជាប្រចាំធានានូវអាយុកាលប្រើប្រាស់បានយូរ និងប្រតិបត្តិការប្រកបដោយសុវត្ថិភាពនៃជើងទម្រម៉ូនីទ័ររបស់អ្នក។

• ការសម្អាត៖ ជូតជើងដោយទន់ ឃamp ក្រណាត់។ ជៀសវាងឧបករណ៍សម្អាតសំណឹក។
• ការត្រួតពិនិត្យតាមកាលកំណត់៖ ពិនិត្យ​រាល់​វីស និង​ការ​តភ្ជាប់​ជា​ទៀងទាត់​ដើម្បី​ធានា​ថា​ពួកវា​តឹង និង​សុវត្ថិភាព។ រឹតបន្តឹងឡើងវិញប្រសិនបើចាំបាច់។
• និទាឃរដូវឧស្ម័ន៖ If monitors feel loose or too stiff, re-adjust the gas spring tension as described in Section 5.1.

7. ការដោះស្រាយបញ្ហា

ប្រសិនបើអ្នកជួបប្រទះបញ្ហា សូមយោងទៅលើបញ្ហាទូទៅ និងដំណោះស្រាយខាងក្រោម៖

• Monitor sags or does not hold position:
  • The gas spring tension may be too low for the monitor's weight. Increase tension by turning the screw clockwise ("+" direction).
  • Ensure all VESA plate screws and arm connections are securely tightened.
• ម៉ូនីទ័ររឹងពេកមិនអាចផ្លាស់ទីបាន៖
  • The gas spring tension may be too high. Decrease tension by turning the screw counter-clockwise ("-" direction).
• ភ្នំមានអារម្មណ៍មិនស្ថិតស្ថេរ៖
  • ត្រូវប្រាកដថា C-clamp or grommet base is securely fastened to the desk.
  • Verify that the main pole is firmly attached to the base.
  • Check that the combined weight of your monitors does not exceed the mount's capacity.

8. លក្ខណៈបច្ចេកទេស

9. ការធានា និងការគាំទ្រ

For warranty information or technical support, please refer to the MOUNT PRO official webគេហទំព័រ ឬទាក់ទងសេវាកម្មអតិថិជនរបស់ពួកគេដោយផ្ទាល់។ រក្សាបង្កាន់ដៃទិញរបស់អ្នកសម្រាប់ការទាមទារធានា។