PawHut 3L Pet Water Fountain User Manual

1. សេចក្តីផ្តើម

Thank you for choosing the PawHut 3L Pet Water Fountain. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pet water fountain. Please read it thoroughly before use and keep it for future reference.

This elevated pet water fountain is designed to provide fresh, filtered water, promoting hydration and reducing strain on your pet's neck, back, and joints. It features an infrared sensor for automatic water dispensing and multiple operating modes to suit your pet's needs.

Image 1.1: A small dog drinking from the PawHut 3L Pet Water Fountain.

2. សេចក្តីណែនាំអំពីសុវត្ថិភាព

• អានការណែនាំទាំងអស់ដោយប្រុងប្រយ័ត្នមុនពេលដំណើរការឧបករណ៍។
• ឧបករណ៍នេះគឺសម្រាប់តែការប្រើប្រាស់ក្នុងផ្ទះប៉ុណ្ណោះ។
• Do not immerse the electrical adapter or power cord in water or other liquids.
• តែងតែដកឌុយប្រភពទឹកចេញមុនពេលសម្អាត ឬធ្វើការថែទាំ។
• Ensure the power cord is placed where it cannot be tripped over or damaged by pets.
• កុំឱ្យសត្វចិញ្ចឹមទំពារខ្សែភ្លើង។
• Use only original PawHut replacement parts and accessories.
• រក្សាឱ្យឆ្ងាយពីដៃកុមារ។
• ប្រសិនបើឧបករណ៍មានបញ្ហា ឬខូចខាត សូមបញ្ឈប់ការប្រើប្រាស់ភ្លាមៗ ហើយទាក់ទងផ្នែកជំនួយអតិថិជន។

3. មាតិកាកញ្ចប់

សូមពិនិត្យមើលមាតិកាកញ្ចប់ ដើម្បីធានាថារបស់របរទាំងអស់មានវត្តមាន និងស្ថិតក្នុងស្ថានភាពល្អ៖

• 1 x Pet Water Fountain Unit
• ម៉ាស៊ីនបូមទឹក 1 x
• 1 x តម្រងកាបូនដែលបានធ្វើឱ្យសកម្ម
• អាដាប់ទ័រថាមពល 1 x
• 1 x សៀវភៅណែនាំអ្នកប្រើប្រាស់

ដ្យាក្រាមផលិតផល

Familiarize yourself with the components of your pet water fountain:

Image 4.1: Visual representation of the fountain's top panel with LED indicators for different modes.

• ទឹក ខasin: អាងស្តុកទឹកសំខាន់សម្រាប់ទឹក។
• Drinking Tray: Top surface where pets drink.
• Filter Slot: Location for the activated carbon filter.
• ម៉ាស៊ីនបូមទឹក៖ Circulates and filters water.
• ឧបករណ៍ចាប់សញ្ញាអ៊ីនហ្វ្រារ៉េដ៖ Detects pet presence for automatic dispensing.
• សូចនាករ LED៖ Display current mode and alerts (water level, filter change).
• ច្រកថាមពល៖ ភ្ជាប់ទៅអាដាប់ទ័រថាមពល។

5. រៀបចំ

Follow these steps to set up your PawHut Pet Water Fountain:

1. វេចខ្ចប់៖ យកសមាសធាតុទាំងអស់ចេញពីវេចខ្ចប់ដោយប្រុងប្រយ័ត្ន។
2. លាងជម្រះ៖ លាងទឹកចេញ ខasin, drinking tray, and pump thoroughly with water. Do not use soap on the pump.
3. ដំឡើងតម្រង៖ Place the activated carbon filter into its designated slot in the drinking tray. Ensure it is seated correctly.
4. ប្រមូលផ្តុំម៉ាស៊ីនបូម៖ Attach the water pump to the bottom of the drinking tray, ensuring the power cord is routed through the designated channel.
5. Fill Water Basin: បំពេញទឹក ខasin with clean tap water up to the MAX fill line. Do not overfill.
6. Place Drinking Tray: Carefully place the drinking tray onto the water basinដោយធានាថាវាត្រូវបានដាក់ដោយសុវត្ថិភាព។
7. ភ្ជាប់ថាមពល៖ Connect the power adapter to the fountain's power port and then plug it into a wall outlet.

The fountain will automatically start in its default operating mode (usually Induction Mode) or indicate its status via the LED lights.

6. របៀបប្រតិបត្តិការ

The PawHut Pet Water Fountain offers three operating modes, indicated by LED lights:

• Induction Mode (Purple LED always on): The infrared sensor detects your pet's presence within 1 meter and a 90° angle, automatically dispensing water. Water flow stops after a short delay when the pet leaves the detection area. This mode conserves energy and keeps water fresh.
• Standard Mode (Blue LED always on): Water flows continuously, providing a constant supply for your pets. This mode is suitable for pets who prefer a constant water source or for multiple pets.
• Sleep Mode (Flashing Purple LED): This mode is typically a low-power state or an alert state. Refer to the LED indicator section for specific meanings of flashing patterns.

To switch between modes, press the mode button located on the fountain's top panel.

Image 6.1: The infrared sensor detects pets within 1 meter and a 90-degree angle.

រូបភាពទី 6.2៖ ទិដ្ឋភាពជិតស្និទ្ធ view of the water flow from the fountain.

7. ការថែទាំ

Regular cleaning and filter replacement are crucial for your pet's health and the longevity of the fountain.

7.1. Cleaning the Fountain

1. ដកដោត៖ ផ្តាច់អាដាប់ទ័រថាមពលពីព្រីជញ្ជាំង។
2. ផ្តាច់៖ Remove the drinking tray and water pump. Empty any remaining water from the basin.
3. សម្អាតសមាសធាតុ៖ Wash the water basin and drinking tray with mild soap and water. Rinse thoroughly to remove all soap residue.
4. ម៉ាស៊ីនបូមស្អាត៖ Disassemble the pump (if possible, refer to pump instructions) and clean any debris or hair from the impeller. Rinse the pump thoroughly with water. Do not use soap on the pump.
5. ប្រមូលផ្តុំឡើងវិញ៖ Reassemble the pump and fountain components.
6. បំពេញបន្ថែម៖ Refill the basin with fresh water and plug the fountain back in.

Clean the fountain at least once a week, or more frequently if you have multiple pets or if the water appears dirty.

7.2. ការជំនួសតម្រង

The activated carbon filter helps purify the water and should be replaced regularly. The fountain's LED indicator may signal when a filter change is needed (flashing blue LED).

Image 7.1: A close-up of the activated carbon filter in its slot.

1. ដកដោត៖ ផ្តាច់អាដាប់ទ័រថាមពល។
2. យកតម្រងចាស់ចេញ៖ Lift the drinking tray and remove the old filter from its slot. Dispose of the old filter.
3. លាងសម្អាតតម្រងថ្មី៖ Rinse the new activated carbon filter under running water to remove any loose carbon dust.
4. ដំឡើងតម្រងថ្មី៖ Place the new filter into the filter slot, ensuring it fits snugly.
5. ប្រមូលផ្តុំ និងបញ្ចូលឡើងវិញ៖ Reassemble the fountain, refill with fresh water, and plug it back in.

Replace the filter every 2-4 weeks, or as indicated by the fountain's LED alert, to ensure optimal water quality.

Image 7.2: LED indicators for low water (flashing red) and filter replacement (flashing blue).

8. ការដោះស្រាយបញ្ហា

If you encounter any issues with your PawHut Pet Water Fountain, please refer to the following common problems and solutions:

• គ្មានលំហូរទឹក៖
  • Check if the power adapter is securely plugged in.
  • Ensure there is enough water in the basin (flashing red LED indicates low water).
  • Clean the water pump and impeller for any blockages (hair, debris).
  • Verify the pump is correctly assembled and seated.
• Fountain is Noisy:
  • ត្រូវប្រាកដថាកម្រិតទឹកគ្រប់គ្រាន់; ទឹកទាបអាចបណ្តាលឱ្យមានសំលេងរំខាន។
  • Clean the water pump and impeller.
  • ត្រូវប្រាកដថាប្រភពទឹកត្រូវបានដាក់នៅលើផ្ទៃរាបស្មើ។
• Water Tastes or Smells Bad:
  • Replace the activated carbon filter (flashing blue LED indicates filter change).
  • Clean the entire fountain thoroughly, including the pump.
  • បំពេញដោយទឹកសាប។
• Infrared Sensor Not Working:
  • ត្រូវប្រាកដថាឧបករណ៍ចាប់សញ្ញាស្អាត និងគ្មានការស្ទះ។
  • Verify the fountain is in Induction Mode (purple LED).
  • Check if the pet is within the detection range (1 meter, 90° angle).

If the problem persists after trying these solutions, please contact PawHut customer support.

9. លក្ខណៈបច្ចេកទេស

Image 9.1: Detailed dimensions of the PawHut 3L Pet Water Fountain.

10. ការធានា និងការគាំទ្រ

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official PawHut website. If you require technical assistance, replacement parts, or have any questions not covered in this manual, please contact PawHut customer support through their official channels.

Webគេហទំព័រ៖ www.pawhut.com (ឧampតំណភ្ជាប់នេះ សូមផ្ទៀងផ្ទាត់ជាផ្លូវការ webគេហទំព័រ)