Steca Solarix PLI 2400-24V Hybrid Inverter with Charge Controller

សេចក្តីផ្តើម

The Steca Solarix PLI is a comprehensive hybrid inverter solution designed for photovoltaic island systems. It integrates an MPPT solar charge controller, a 230V pure sine wave inverter, and an integrated battery charger into a single unit. This device enables the creation of an independent 230V power grid using a solar generator and battery bank. It also supports recharging batteries via generator or grid connection.

The Solarix PLI functions as a grid-guided UPS hybrid inverter with zero export capability and blackout protection. In grid-connected operation, solar power helps reduce electricity costs. In the event of a power outage, the battery seamlessly takes over power supply within 10 milliseconds, ensuring continuous operation of essential loads.

សេចក្តីណែនាំអំពីសុវត្ថិភាព

សូមអានការណែនាំសុវត្ថិភាពទាំងអស់ដោយប្រុងប្រយ័ត្នមុនពេលដំឡើង និងប្រតិបត្តិការ។ ការមិនអនុវត្តតាមការណែនាំទាំងនេះអាចបណ្តាលឱ្យឆក់ចរន្តអគ្គិសនី ឆេះ ឬរបួសធ្ងន់ធ្ងរ។

• ការដំឡើងត្រូវតែធ្វើឡើងដោយបុគ្គលិកដែលមានសមត្ថភាពតែប៉ុណ្ណោះ។
• ត្រូវប្រាកដថាប្រភពថាមពលទាំងអស់ត្រូវបានផ្តាច់ មុនពេលដំណើរការខ្សែភ្លើង ឬការថែទាំ។
• កុំ​ឲ្យ​ឧបករណ៍​បម្លែង​វង់ភ្លេង​ត្រូវ​ភ្លៀង ព្រិល ទឹក​ថ្នាំ ឬ​សារធាតុ​រាវ​ណា​មួយ​ឡើយ។
• Do not disassemble the unit. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• ធានាឱ្យមានខ្យល់ចេញចូលត្រឹមត្រូវជុំវិញ Inverter ដើម្បីការពារការឡើងកំដៅខ្លាំង។
• Connect the inverter only to battery systems with the correct voltage (24V សម្រាប់ម៉ូដែលនេះ)។
• Always use appropriate overcurrent protection devices (fuses/breakers) for all circuits connected to the inverter.
• ទុកកុមារឱ្យឆ្ងាយពី Inverter និងការតភ្ជាប់របស់វា។

ផលិតផលលើសview

The Steca Solarix PLI unit features a robust design with a clear display and intuitive controls for monitoring and configuration.

រូបភាពទី 1: ផ្នែកខាងមុខ view of the Steca Solarix PLI 2400-24V Hybrid Inverter. The central display shows operational status, while buttons below allow navigation and setting adjustments.

សមាសធាតុសំខាន់ៗរួមមានៈ

• អេក្រង់ LCD៖ Shows real-time system data, operating status, and error codes.
• ប៊ូតុងបញ្ជា៖ Used for navigating menus and adjusting settings (ESC, UP, DOWN, ENTER).
• AC Input/Output Terminals: For connecting to the grid and supplying AC loads.
• ស្ថានីយថ្ម៖ សម្រាប់ភ្ជាប់ទៅថ្មសាក។
• PV Input Terminals: For connecting to the solar panel array.
• ច្រកទំនាក់ទំនង៖ For external monitoring and control (e.g., USB, RS232).

Figure 2: Dimensional drawing of the Steca Solarix PLI, indicating its physical size and mounting points. Dimensions are provided in millimeters.

រៀបចំ

Proper installation is crucial for the safe and efficient operation of your Solarix PLI inverter. Follow these general steps:

1. ការដំឡើង៖ Select a suitable location for mounting the inverter. It should be indoors, dry, well-ventilated, and away from direct sunlight or heat sources. Ensure the mounting surface can support the inverter's weight (approx. 9.01 kg).
2. ការភ្ជាប់ថ្ម៖ Connect the battery bank to the inverter's battery terminals. Ensure correct polarity (+ to + and - to -). Use appropriately sized cables and fuses. This model is designed for 24V battery systems.
3. ការតភ្ជាប់អារេ PV៖ Connect the solar panel array to the PV input terminals. Observe correct polarity and ensure the PV array voltage និងចរន្តស្ថិតនៅក្នុងលក្ខណៈបច្ចេកទេសរបស់អាំងវឺរទ័រ។
4. AC Input Connection (Grid/Generator): If connecting to the utility grid or a generator, connect the AC input cable to the designated terminals. Ensure proper grounding.
5. AC Output Connection (Loads): Connect your AC loads (appliances, circuits) to the AC output terminals of the inverter.
6. ការបញ្ចូលថាមពលដំបូង៖ Once all connections are secure and verified, switch on the battery breaker, then the PV array breaker (if applicable), and finally the AC input breaker. The inverter display should power on.
7. ការកំណត់រចនាសម្ព័ន្ធ៖ Use the control buttons and LCD display to configure operating parameters such as battery type, charging current, output voltage, and operating modes according to your system requirements.

Refer to the detailed wiring diagrams and specific instructions in the full user manual for precise connection procedures and safety precautions.

ប្រតិបត្តិការ

The Steca Solarix PLI offers various operating modes to optimize energy flow. The LCD display provides real-time information on input voltage, ទិន្នផលវ៉ុលtage, battery status, charging current, and load power.

ការបង្ហាញ និងការរុករក

The LCD display shows various screens cycling through system parameters. Use the UP and DOWN buttons to manually cycle through screens or adjust values in settings. The ENTER button confirms selections, and ESC returns to the previous menu or screen.

របៀបប្រតិបត្តិការ

• Utility Priority (UPS Mode): The inverter primarily uses grid power to supply loads and charge batteries. Solar power is used when available to supplement or reduce grid consumption. In case of grid failure, it switches to battery power.
• អាទិភាពព្រះអាទិត្យ៖ Solar power is prioritized for loads and battery charging. Grid power is only used when solar power is insufficient or batteries are low.
• អាទិភាពថ្ម៖ Loads are primarily supplied by battery power. Solar charges the battery. Grid power is used as a last resort when battery voltage ធ្លាក់ចុះក្រោមកម្រិតកំណត់។

Standby Functionality

The inverter features a standby mode to conserve energy. It typically enters standby when the load is below a certain threshold (e.g., <40W) and reactivates when the load increases (e.g., >100W). This threshold may be configurable in advanced settings.

ថែទាំ

Regular maintenance ensures the longevity and optimal performance of your Steca Solarix PLI inverter.

• ការសម្អាត៖ ឧស្សាហ៍សម្អាតផ្នែកខាងក្រៅនៃ Inverter ដោយក្រណាត់ទន់ស្ងួត។ កុំប្រើទឹកសម្អាត ឬសារធាតុរំលាយ។ ត្រូវប្រាកដថារន្ធខ្យល់គ្មានធូលី និងកំទេចកំទី។
• ពិនិត្យការតភ្ជាប់៖ Annually inspect all electrical connections (battery, PV, AC input/output) for tightness and signs of corrosion. Loose connections can cause overheating and damage.
• ខ្យល់ចេញចូល៖ Ensure the area around the inverter remains clear to allow for proper airflow and heat dissipation.
• សុខភាពថ្ម៖ Monitor your battery bank's health according to the battery manufacturer's recommendations. Ensure proper charging and discharge cycles.

Always disconnect all power sources before performing any maintenance or inspection.

ការដោះស្រាយបញ្ហា

This section addresses common issues you might encounter with your Steca Solarix PLI inverter.

For issues not listed here or if solutions do not resolve the problem, please contact Steca customer support.

លក្ខណៈបច្ចេកទេស

ការធានា និងការគាំទ្រ

The Steca Solarix PLI typically comes with a manufacturer's warranty. Based on available information, the warranty period for this product is generally 2 ឆ្នាំ។ ចាប់ពីថ្ងៃទិញ។ សូមរក្សាភស្តុតាងនៃការទិញរបស់អ្នកសម្រាប់ការទាមទារធានា។

For technical support, troubleshooting beyond this manual, or warranty service, please contact Steca customer service. You may need to provide your product model number (4250852802154) and serial number (if applicable).

Note: Warranty terms may vary by region and retailer. Always refer to the official warranty documentation provided with your product for precise details.