សេចក្តីផ្តើម
This manual provides detailed instructions for the installation, operation, and maintenance of your APIELE 19mm Momentary Push Button Switch. This high-quality switch features a 12V LED 'Angel Eye' illumination, a durable aluminum alloy shell, and an IP65 waterproof rating, making it suitable for various applications in wet or dusty environments. Please read this manual thoroughly before installation and use.
លក្ខណៈពិសេសផលិតផល
- សកម្មភាពមួយភ្លែត៖ The switch activates when pressed and held, and deactivates upon release.
- 12V LED Illumination: Integrated 'Angel Eye' LED ring operates on 12V, providing clear visual feedback.
- សំណង់រឹងមាំ៖ Manufactured with a black aluminum alloy shell for enhanced longevity and resistance.
- កម្រិតការពារទឹក IP65៖ Designed to withstand dust and water splashes, suitable for outdoor and marine applications.
- High Life Expectancy: Rated for 200,000 electrical cycles and 1,000,000 mechanical cycles.
- Independent LED Wiring: The LED can be wired separately from the switch contacts, allowing for flexible indicator light control.
លក្ខណៈបច្ចេកទេស
Image: Detailed dimensions and specifications of the APIELE 19mm Momentary Push Button Switch, showing mounting hole size, operation type, lamp color options, shell material, and lamp វ៉ុលtage.
| ទំហំរន្ធម៉ោន | 19mm (3/4 អ៊ីញ) |
| ប្រភេទប្រតិបត្តិការ | Momentary (Push & Hold ON, Release OFF) |
| ការកំណត់រចនាសម្ព័ន្ធទំនាក់ទំនង | 1NO (Normally Open) |
| សញ្ញាប័ត្រការពារ | IP65 (មិនជ្រាបទឹក និងធូលី) |
| វាយតម្លៃបច្ចុប្បន្ន | 5A |
| Lamp វ៉ុលtage | 12V DC |
| សម្ភារៈសែល | អាលុយមីញ៉ូម Alloy |
| ជីវិតអគ្គិសនី | 200,000 វដ្ត |
| ជីវិតមេកានិច | 1,000,000 វដ្ត |
| វិមាត្រធាតុ (L x W x H) | 40 x 30 x 10 ម។ |
Image: Illustration of the switch's mechanical and electrical life cycles, highlighting its durability.
ការដំឡើងនិងការដំឡើង
ការម៉ោន
- Ensure the mounting surface is clean and free of obstructions.
- Drill a 19mm (3/4 inch) diameter hole in the desired mounting location.
- Insert the switch body through the drilled hole from the front.
- Secure the switch in place by tightening the included nut onto the threaded body from the rear. Do not overtighten.
ខ្សែភ្លើង
The switch comes with a wire socket plug for convenient connection. Refer to the diagram below for proper wiring. The LED and switch contacts are independent, allowing for various wiring configurations.
Image: Detailed wiring diagram illustrating the function of each wire color (Yellow: Normal Closed Pin, Blue: Normal Open Pin, Green: Common Pin, Red: Positive LED Pin, Black: Negative LED Pin).
- ខ្សែពណ៌បៃតង៖ Common Pin (C) for the switch contacts.
- ខ្សែពណ៌ខៀវ៖ Normally Open Pin (NO). Connect this to your load's positive input if you want the circuit to close when the button is pressed.
- ខ្សែពណ៌លឿង៖ Normally Closed Pin (NC). This contact opens when the button is pressed. (Note: This specific model is listed as 1NO, so the yellow wire might not be present or functional for this configuration).
- ខ្សែក្រហម៖ Positive (+) terminal for the 12V LED.
- ខ្សែខ្មៅ៖ Negative (-) terminal for the 12V LED.
Typical Wiring for Momentary ON (Load activates when pressed):
- Connect the positive power supply to the Green (Common) ខ្សែ។
- ភ្ជាប់ Blue (Normally Open) wire to the positive input of your device/load.
- Connect the negative power supply to the negative input of your device/load.
- For LED illumination, connect the ក្រហម wire to a 12V positive source and the ខ្មៅ wire to a 12V negative (ground) source. The LED can be powered independently or in conjunction with the switch operation.
Image: The APIELE 19mm Momentary Push Button Switch shown with its corresponding wire socket plug, facilitating easy and secure connections.
ប្រតិបត្តិការ
This is a momentary push button switch. To operate:
- ចុចឱ្យជាប់៖ When the button is pressed and held, the internal contacts close (for the NO configuration), activating the connected device or circuit.
- ចេញផ្សាយ៖ When the button is released, the internal contacts open, deactivating the connected device or circuit.
- សូចនាករ LED៖ The 12V LED ring can be wired to illuminate continuously, only when the switch is pressed, or under separate control, depending on your wiring configuration.
ថែទាំ
The APIELE push button switch is designed for durability and requires minimal maintenance.
- ការសម្អាត៖ Periodically wipe the switch surface with a soft, damp ក្រណាត់ដើម្បីយកធូលីនិងភាពកខ្វក់ចេញ។ ជៀសវាងប្រើសារធាតុគីមីដ៏ខ្លាំងឬសារធាតុសម្អាតដែលមានជាតិกัดกร่อน។
- ពិនិត្យការតភ្ជាប់៖ Ensure all wire connections remain secure, especially in environments with vibration or frequent movement.
- ការការពារបរិស្ថាន៖ While rated IP65, prolonged submersion or exposure to high-pressure water jets is not recommended.
Image: The APIELE switch demonstrating its IP65 waterproof capabilities, suitable for challenging environments.
ការដោះស្រាយបញ្ហា
- Switch Not Activating Device:
- Verify all wiring connections are correct and secure, especially the Common (Green) and Normally Open (Blue) wires.
- Ensure the power supply to the switch and device is active.
- Check the device itself to ensure it is functioning correctly.
- LED មិនបំភ្លឺ៖
- Confirm that 12V power is supplied to the LED's Red (+) and Black (-) wires.
- Check for any breaks in the LED wiring.
- While the LED is generally tolerant, ensure correct polarity for optimal performance.
- Loose Switch in Mounting Hole:
- Ensure the mounting hole diameter is exactly 19mm (3/4 inch).
- Tighten the securing nut firmly from the rear of the mounting panel.
ការធានា និងការគាំទ្រ
This APIELE push button switch comes with a ការធានារយៈពេល 3 ឆ្នាំ។. If the product experiences a non-man-made failure within this period, please contact APIELE customer support for assistance or a replacement.
For any technical inquiries, installation questions, or support needs, please contact APIELE directly through the retailer's platform or the official APIELE webគេហទំព័រ។