S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor User Manual

1. សេចក្តីផ្តើម

This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.

Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.

2. ការដំឡើងនិងការដំឡើង

ការដំឡើងត្រឹមត្រូវគឺមានសារៈសំខាន់ខ្លាំងណាស់សម្រាប់ដំណើរការល្អបំផុត និងសុវត្ថិភាព។ សូមអនុវត្តតាមជំហានទាំងនេះដោយប្រុងប្រយ័ត្ន។

2.1 ការវេចខ្ចប់ និងការត្រួតពិនិត្យ

• Carefully remove the sensor from its packaging.
• Inspect the sensor for any visible damage that may have occurred during shipping.
• ផ្ទៀងផ្ទាត់ថាសមាសធាតុទាំងអស់ដែលបានរាយបញ្ជីនៅក្នុងសន្លឹកវេចខ្ចប់មានវត្តមាន។

2.2 ការដំឡើងឧបករណ៍ចាប់សញ្ញា

The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.

1. Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
2. Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
3. Ensure the sensor is oriented correctly for the intended detection application.

រូបភាពទី 2: ចំហៀង view of the S18AW3FF50 sensor, showing the threaded barrel and cable.

2.3 ការតភ្ជាប់អគ្គិសនី

ព្រមាន៖ Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.

The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.

Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.

Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.

3. ប្រតិបត្តិការ

Once installed and wired, the S18AW3FF50 sensor is ready for operation.

3.1 បើកដំណើរការ

Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.

3.2 គោលការណ៍នៃការរកឃើញ

The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).

៤.៣ ជួរ និងដំណើរការ

The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.

4. ការថែទាំ

The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.

4.1 ការសម្អាត

• Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
• Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.

4.2 Cable and Connection Inspection

• Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
• Check electrical connections to ensure they remain secure and free from corrosion.

5. ការដោះស្រាយបញ្ហា

This section provides solutions to common issues encountered with the S18AW3FF50 sensor.

6. លក្ខណៈបច្ចេកទេស

Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.

• ម៉ូដែល៖ S18AW3FF50
• ស៊េរី៖ EZ-Beam S18 Series
• ជួរនៃការរកឃើញ៖ 50 ម។
• បញ្ចូលវ៉ុលtage: 20-250VAC
• ប្រភេទលទ្ធផល៖ SPST Solid-State Light Operate
• ប្រវែងខ្សែ៖ 2 ម (6.5 ហ្វីត)
• ប្រភេទឧបករណ៍ចាប់សញ្ញា៖ Photoelectric, Fixed Field
• ក្រុមហ៊ុនផលិត៖ BANNER ENGINEERING
• ASIN: B07RZTBRLS
• កាលបរិច្ឆេទដំបូងអាចរកបាន៖ ថ្ងៃទី 3 ខែធ្នូ ឆ្នាំ 2021

7. ការធានា និងការគាំទ្រ

For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official webគេហទំព័រ។

គោលការណ៍ត្រឡប់មកវិញ៖ The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.

ក្រុមហ៊ុនផលិត៖ BANNER ENGINEERING

សម្រាប់ជំនួយបន្ថែម សូមចូលទៅកាន់គេហទំព័រ BANNER ENGINEERING official webគេហទំព័រ.