សេចក្តីផ្តើម
The Armor3 "ReadyHub" 3-Port HD Switcher allows you to connect up to three HD game consoles or other HD devices to a single HD display, such as an HDTV or monitor. This device simplifies your setup by eliminating the need to constantly swap cables, providing a convenient way to switch between your connected devices with the push of a button or via the included remote control. It supports 4K resolution, ensuring high-quality video output.
មាតិកាកញ្ចប់
សូមផ្ទៀងផ្ទាត់ថាធាតុទាំងអស់មាននៅក្នុងកញ្ចប់របស់អ្នក៖
- Armor3 "ReadyHub" 3-Port HD Switcher
- ការបញ្ជាពីចម្ងាយ
- Power Adapter (typically included for active switchers)
Note: HD cables are not included and must be purchased separately.
Image: The Armor3 ReadyHub 3-Port HD Switcher shown in its retail packaging, highlighting its 4K and 3D compatibility.
ការណែនាំអំពីការដំឡើង
Follow these steps to connect your Armor3 "ReadyHub" HD Switcher:
- ភ្ជាប់ឧបករណ៍បញ្ចូល៖ Plug your HD game consoles (e.g., Nintendo Switch, PS4, Xbox One, Wii U, Xbox 360) or other HD devices into the "INPUT 1", "INPUT 2", and "INPUT 3" ports on the HD Switcher using HD cables.
- ភ្ជាប់ទៅការបង្ហាញ៖ Connect one end of an HD cable to the "OUTPUT" port on the HD Switcher and the other end to an available HD input port on your HDTV or display.
- ភ្ជាប់ថាមពល៖ Plug the included power adapter into the "DC 5V" port on the HD Switcher, then plug the adapter into a standard electrical outlet. The power indicator light on the switcher should illuminate.
- ជ្រើសរើសការបញ្ចូល៖ Turn on your HD display and select the corresponding HD input channel that the switcher is connected to.
Image: The Armor3 ReadyHub HD Switcher with HD cables connected to its input and output ports, alongside its remote control. This illustrates a typical setup configuration.
សេចក្តីណែនាំប្រតិបត្តិការ
Once connected, you can easily switch between your devices:
- ការប្តូរដោយដៃ៖ Press the "SELECT" button on the front of the HD Switcher to cycle through the connected input devices (Input 1, Input 2, Input 3). The corresponding LED indicator will light up to show the active input.
- ការប្តូរការបញ្ជាពីចម្ងាយ៖ Use the included remote control to directly select the desired input. Press the "1", "2", or "3" button on the remote to switch to Input 1, Input 2, or Input 3 respectively.
Ensure that the device you wish to display is powered on for the switcher to detect its signal.
ថែទាំ
To ensure the longevity and optimal performance of your Armor3 "ReadyHub" HD Switcher:
- ការសម្អាត៖ ប្រើក្រណាត់ទន់ និងស្ងួត ដើម្បីសម្អាតផ្នែកខាងក្រៅរបស់ឧបករណ៍។ កុំប្រើឧបករណ៍សម្អាតរាវ ឬវត្ថុសំណឹក។
- ការផ្ទុក៖ Store the switcher in a cool, dry place away from direct sunlight and extreme temperatures.
- ការគ្រប់គ្រង៖ ជៀសវាងការទម្លាក់ឧបករណ៍ ឬធ្វើឱ្យវាប៉ះពាល់ខ្លាំង។
ការដោះស្រាយបញ្ហា
If you encounter issues with your HD Switcher, please refer to the following common problems and solutions:
| បញ្ហា | ដំណោះស្រាយ |
|---|---|
| No signal on display. |
|
| ការបញ្ជាពីចម្ងាយមិនដំណើរការទេ។ |
|
| ភ្លើងសញ្ញាភ្លើងត្រូវបានបិទ។ |
|
លក្ខណៈបច្ចេកទេស
- ម៉ូដែល៖ M07385
- ធាតុចូល៖ 3 x HD (HDMI)
- លទ្ធផល៖ 1 x HD (HDMI)
- ដំណោះស្រាយដែលគាំទ្រ៖ រហូតដល់ 4K
- ភាពឆបគ្នា៖ Nintendo Switch, PlayStation 4, Xbox One, Nintendo Wii U, Xbox 360, and other HD devices.
- វិមាត្រ៖ 4.72 x 1.57 x 4.75 អ៊ីង (12 x 4 x 12.06 សង់ទីម៉ែត្រ)
- ទម្ងន់៖ 3.2 អោន (90.7 ក្រាម)
ការធានា និងការគាំទ្រ
For warranty information or technical support, please contact Armor3 customer service. Details can typically be found on the product packaging or the official Armor3 webគេហទំព័រ។ សូមរក្សាភស្តុតាងនៃការទិញរបស់អ្នកសម្រាប់ការទាមទារធានា។
សម្រាប់ជំនួយបន្ថែម អ្នកអាចចូលទៅកាន់គេហទំព័ររបស់អ្នកផលិត webគេហទំព័រ ឬទាក់ទងបណ្តាញជំនួយរបស់ពួកគេ។