Samson Auro D208 8-Inch Active Loudspeaker

សេចក្តីផ្តើម

This manual provides essential information for the proper setup, operation, and maintenance of your Samson Auro D208 8-Inch Active Loudspeaker. Please read these instructions thoroughly before using the product to ensure optimal performance and safety.

ព័ត៌មានសុវត្ថិភាព

Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, or injury. Keep the loudspeaker away from water and moisture. Do not block ventilation openings. Refer all servicing to qualified personnel.

មាតិកាកញ្ចប់

ផ្ទៀងផ្ទាត់ថាកញ្ចប់របស់អ្នកមានធាតុដូចខាងក្រោម៖

• Samson Auro D208 8-Inch Active Loudspeaker
• ខ្សែថាមពល
• សៀវភៅណែនាំអ្នកប្រើប្រាស់

រៀបចំ

ការដាក់

The Auro D208 is designed for versatile placement. It can be used as a main PA speaker, a floor monitor, or mounted on a standard 1 3/8-inch (35mm) pole. Ensure the speaker is placed on a stable, level surface or securely mounted to prevent tipping.

ខាងមុខ view of the Samson Auro D208 Active Loudspeaker, showcasing ការរចនាបង្រួម និងសំណាញ់ការពាររបស់វា។

ការតភ្ជាប់

The Auro D208 features a Mic/Line input and an additional Line output for linking multiple speakers.

1. ការតភ្ជាប់ថាមពល៖ Connect the supplied power cable to the AC inlet on the rear panel and then to a suitable power outlet.
2. ការតភ្ជាប់បញ្ចូល៖ Use an XLR or 1/4-inch cable to connect your microphone or line-level audio source (e.g., mixer, instrument) to the Mic/Line input.
3. Linking Speakers: To connect additional Auro D208 speakers, use an XLR cable from the Line output of the first speaker to the input of the next speaker.

Rear panel of the Samson Auro D208, illustrating the Mic/Line input, Line output, volume control, and Clip LED.

សេចក្តីណែនាំប្រតិបត្តិការ

បើក/បិទ

After all connections are made, turn on the power switch located on the rear panel. It is recommended to turn on the Auro D208 last in your audio chain and turn it off first.

ការគ្រប់គ្រងកម្រិតសំឡេង

Adjust the main Volume control knob on the rear panel to set the overall output level of the loudspeaker. Start with the volume at its minimum setting and gradually increase it to the desired level.

សូចនាករ LED ក្លីប

The Clip LED illuminates when the input signal is too strong, indicating potential distortion. If the Clip LED lights up frequently, reduce the input level from your source or the volume on the Auro D208 to prevent signal clipping.

ថែទាំ

ការសម្អាត

Clean the exterior of the loudspeaker with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure the speaker is unplugged before cleaning.

ការផ្ទុក

When not in use, store the loudspeaker in a dry, cool environment, away from direct sunlight and extreme temperatures. If storing for extended periods, consider covering it to protect against dust.

ការដោះស្រាយបញ្ហា

លក្ខណៈបច្ចេកទេស

ការធានា និងការគាំទ្រ

ព័ត៌មានធានា

This product is covered by a 1-year parts and labor limited warranty. Please retain your proof of purchase for warranty claims.

ជំនួយអតិថិជន

For technical assistance, service, or warranty inquiries, please visit the official Samson webគេហទំព័រ ឬទាក់ទងផ្នែកគាំទ្រអតិថិជនរបស់ពួកគេ។ ព័ត៌មានទំនាក់ទំនងជាធម្មតាអាចរកបាននៅលើក្រុមហ៊ុនផលិត webគេហទំព័រ ឬនៅក្នុងការវេចខ្ចប់ផលិតផល។