សេចក្តីផ្តើម
This manual provides essential instructions for the proper setup, operation, and maintenance of your Intermec SR30 Linear Imager RS232 Barcode Scanner. Please read this manual thoroughly before using the device to ensure optimal performance and to prevent damage.
The Intermec SR30 is a high-performance linear imager designed for reliable barcode scanning in various environments, connecting via an RS232 interface.
ព័ត៌មានសុវត្ថិភាព
- Do not expose the scanner to extreme temperatures, humidity, or direct sunlight.
- ជៀសវាងការទម្លាក់ម៉ាស៊ីនស្កេន ឬដាក់វាឱ្យប៉ះពាល់ធ្ងន់ធ្ងរ។
- Do not attempt to open or modify the scanner. Refer all servicing to qualified personnel.
- Use only the power supply and cables provided or approved by Intermec.
- រក្សាបង្អួចស្កេនឱ្យស្អាត ដើម្បីធានាបាននូវការអានបាកូដបានត្រឹមត្រូវ។
មាតិកាកញ្ចប់
ផ្ទៀងផ្ទាត់ថាកញ្ចប់របស់អ្នកមានធាតុដូចខាងក្រោម៖
- Intermec SR30 Linear Imager Barcode Scanner
- ខ្សែភ្ជាប់ RS232
- អង្គភាពផ្គត់ផ្គង់ថាមពល
- ឯកសារ (សៀវភៅណែនាំនេះ ឬស្រដៀងគ្នា)
ប្រសិនបើមានរបស់របរណាមួយបាត់ ឬខូចខាត សូមទាក់ទងអ្នកផ្គត់ផ្គង់របស់អ្នកជាបន្ទាន់។
រៀបចំ
1. ការភ្ជាប់ម៉ាស៊ីនស្កេន
- Connect the RS232 Cable: Plug the RS232 connector of the interface cable into the corresponding serial port on your host computer or POS system.
- Connect to Scanner: Plug the other end of the interface cable into the port at the base of the SR30 scanner. Ensure a secure connection.
- ភ្ជាប់ការផ្គត់ផ្គង់ថាមពល៖ Connect the power supply unit to the power port on the interface cable or directly to the scanner base, as applicable for your specific cable configuration. Plug the power supply into a standard electrical outlet.
2. ការបើកថាមពលដំបូង
Once connected, the scanner should power on automatically. Observe the indicator lights (typically an LED) for initial status. The scanner may emit a short beep to indicate it is ready for operation.
3. Basic Configuration (if required)
The SR30 scanner may require configuration for specific RS232 communication parameters (e.g., baud rate, data bits, parity) to match your host system. Refer to the detailed programming guide (often a separate document with programming barcodes) for advanced configuration. For basic operation, the default settings are often sufficient.
ដំណើរការម៉ាស៊ីនស្កេន
1. ស្កេនបាកូដ
- គោលបំណង៖ Point the scanning window of the SR30 at the barcode you wish to read. Ensure the entire barcode is within the scanner's field of view.
- ស្កេន៖ Press and hold the trigger button (if applicable) or present the barcode to the scanner's window for automatic scanning.
- ការបញ្ជាក់៖ A successful scan is typically indicated by an audible beep and/or a change in the LED indicator light (e.g., green light). The barcode data will be transmitted to your host system.
2. Understanding Indicators
- LED បៃតង៖ បង្ហាញពីការអានបាកូដជោគជ័យ។
- Red/Amber LED: May indicate an error, scanner busy, or awaiting input. Consult the full programming guide for specific error codes or patterns.
- Beep Sounds: Different beep patterns can indicate successful reads, errors, or configuration changes.
ថែទាំ
ការសម្អាតម៉ាស៊ីនស្កេន
- Regularly clean the scanning window with a soft, lint-free cloth dampលាយជាមួយទឹក ឬឧបករណ៍សម្អាតស្រាល និងមិនមានសំណឹក។
- Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the scanner's surface.
- ត្រូវប្រាកដថាម៉ាស៊ីនស្កេនត្រូវបានបិទមុនពេលសម្អាត។
ការផ្ទុក
When not in use, store the scanner in a clean, dry environment away from direct sunlight and extreme temperatures.
ការដោះស្រាយបញ្ហា
| បញ្ហា | មូលហេតុដែលអាចកើតមាន | ដំណោះស្រាយ |
|---|---|---|
| ម៉ាស៊ីនស្កេនមិនបើកទេ។ | Power cable not connected; power outlet faulty; power supply unit failure. | Check all cable connections. Try a different power outlet. Ensure the power supply is functioning. |
| ម៉ាស៊ីនស្កេនមិនអានបាកូដទេ។ | Barcode damaged or poorly printed; scanning window dirty; incorrect symbology enabled; scanner not configured for host. | Ensure barcode is clear. Clean scanning window. Verify scanner configuration matches host system requirements. Try scanning a known good barcode. |
| Barcode data not appearing on host. | RS232 cable loose or faulty; incorrect RS232 communication settings (baud rate, parity); host application not ready. | Check RS232 cable connection. Verify RS232 settings on both scanner and host. Ensure host application is active and ready to receive input. |
លក្ខណៈបច្ចេកទេស
- ម៉ូដែល៖ SR30
- លេខផ្នែក៖ 225-727-003 (Kit)
- ប្រភេទម៉ាស៊ីនស្កេន៖ រូបភាពលីនេអ៊ែរ
- ចំណុចប្រទាក់៖ RS232
- ក្រុមហ៊ុនផលិត៖ អ៊ីនធឺមេក
- ទំងន់ធាតុ៖ 0.01 ounces (approximate, scanner only)
- នាយកដ្ឋាន៖ បាកូដ
- ASIN: B003T0WF3S
ការធានា និងការគាំទ្រ
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Intermec webគេហទំព័រ។ រក្សាបង្កាន់ដៃទិញរបស់អ្នកជាភស្តុតាងនៃការទិញសម្រាប់ការទាមទារធានា។
Contact your reseller or Intermec customer service for assistance with issues not covered in this manual.